General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

symptoms for transmission control module?

Old 04-14-2003, 07:12 PM
  #1  
Senior Member
Thread Starter
 
Nore474's Avatar
 
Join Date: May 2002
Posts: 631
symptoms for transmission control module?

for about 3 months my cars been jerking when i put it into Drive
then recently it won't go past 3,500 RPM when i floor it
And my car will not go into reverse, it feels like its in park

is it my Tranny or transmission control module, or shifter?
car has 132k miles on it, and its a 95 auto

how do you check the Transmission control module?
Nore474 is offline  
Old 04-15-2003, 05:49 AM
  #2  
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
njmaxseltd's Avatar
 
Join Date: Jun 2001
Posts: 16,033
What exactly do you mean when you say it wount go past 3500 RPM's. Does it shift at that point all the time, not letting the engine rev to 6K? Or is your engine not able to go past 3500 RPM's even when the car is in park or neutral? Symptons such as that suggest your MAF sensor is bad. However being you can't get reverse suggests your transmission is gone. If the controller was bad, you'd get a CEL. The tranny controller is in with the ECU.

You may very well have 2 things going on here.
njmaxseltd is offline  
Old 04-15-2003, 10:22 AM
  #3  
Senior Member
Thread Starter
 
Nore474's Avatar
 
Join Date: May 2002
Posts: 631
when I am driving anytime at any speed i floor it, and it doesn't do anything the rpm gauge just slowly, slowly moves up

I got the ECU reading 3 fast 11 slow =Improper shifting into first gear!
Nore474 is offline  
Old 04-15-2003, 10:46 AM
  #4  
Senior Member
 
AntGVR4's Avatar
 
Join Date: Aug 2000
Location: Clifton, NJ
Posts: 2,308
Anyone have any idea what is going on with the car.

This is MY old maxima by the way.
He's put 8k miles on it since I sold it and he's had this slight problem since about 2k - 3k miles ago. Then all of a sudden it stops engaging first gear properly.
I have no experience with the internals of auto trannies so ANY input would be greatly appreciated.

Thanks guys

Ant
AntGVR4 is offline  
Old 04-15-2003, 11:19 AM
  #5  
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
njmaxseltd's Avatar
 
Join Date: Jun 2001
Posts: 16,033
Originally posted by Nore474
when I am driving anytime at any speed i floor it, and it doesn't do anything the rpm gauge just slowly, slowly moves up

I got the ECU reading 3 fast 11 slow =Improper shifting into first gear!
I think you need to get your car to a tranny shop ASAP. Sounds like it's hung up in the high gears and doesn't downshift.
njmaxseltd is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AaronL
5th Generation Maxima (2000-2003)
15
11-15-2020 11:52 AM
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
Bonka
4th Generation Maxima (1995-1999)
2
09-14-2015 11:18 PM
EdRomo86
6th Generation Maxima (2004-2008)
0
09-12-2015 07:49 PM
videomano
Maximas for Sale / Wanted
0
09-08-2015 03:28 PM


Thread Tools
Search this Thread
Quick Reply: symptoms for transmission control module?



All times are GMT -7. The time now is 06:10 PM.