Clutch Pedal Wont Rise After Pressing Down
#1
Clutch Pedal Wont Rise After Pressing Down
-im assuming the system needs to be bled, or is it more serious.
i can start the car in 1st, but not reverse. idk why.
anybody??? please help
i can start the car in 1st, but not reverse. idk why.
anybody??? please help
#2
reverse is a straight-cut gear that engages when a small idler gear slides into place. rolling 1mph forward and trying to shift into reverse (with clutch pedal working fine) will result in grinding sounds.
all forward gears are synchronized and pre-meshed, so rolling 1mph backwards and shifting into 1st will behave just like you shifted into 1st while at a dead stop. It just puts a tiny little bit more wear on the synchros to put it in 1st when rolling backwards, is all.
#5
if you can watch while someone else pushes it, to see where it's coming from, it'll be pretty easy to see where it's coming from so you'll know what to replace.
also it might last a day or two per fillup if it's dribbling a drop or two at a time.... won't last long at all if it's squirting out.
also it might last a day or two per fillup if it's dribbling a drop or two at a time.... won't last long at all if it's squirting out.
#9
yea i didn't mean to suggest to just leave it as it was. but if you can't replace it until the weekend then you might be able to buy a big bottle of brake fluid and make due until then. my friend's Probe w/ the leaky SCyl is about to be retired so he's just topping it off every week until i put together his maxima for him middle of september (the white 89SE 5spd). then he'll join Maxima.org and everyone will be happy.
Last edited by CapedCadaver; 08-26-2008 at 02:20 PM.
#10
yea i didn't mean to suggest to just leave it as it was. but if you can't replace it until the weekend then you might be able to buy a big bottle of brake fluid and make due until then. my friend's Probe w/ the leaky SCyl is about to be retired so he's just topping it off every week until i put together his maxima for him middle of september (the white 89SE 5spd). then he'll join Maxima.org and everyone will be happy.
#11
yea i didn't mean to suggest to just leave it as it was. but if you can't replace it until the weekend then you might be able to buy a big bottle of brake fluid and make due until then. my friend's Probe w/ the leaky SCyl is about to be retired so he's just topping it off every week until i put together his maxima for him middle of september (the white 89SE 5spd). then he'll join Maxima.org and everyone will be happy.
and plus, i wouldnt wanna try, since i do ALOT of daily driving, to me, it wouldnt be worth it. 100+ miles per day, you do the math
#12
haha yea that many miles/day you'd pay more in fluid than you would even waiting a few days.. you'd need a whole bottle each day at that rate
#14
now that this is done, its shifting like butter, but shifting into second AT TIMES feels really crappy, and sometimes when i downshift, it feels as if one of my mount need to be changed. anyone have similar problems???
#15
double clutching tends to work the best for down shifting, I think, and be sure to check your gear lube it does need to be changed from time to time 60k irrc it does make a difference, other then that it's a old car and will have some quirks, and mounts isn't a bad idea.
#16
i doubleclutch from 5th to 3rd always. try to from 3 to 2 but the rhythm isn't always as second-nature as the 5-3 is.
#17
get one at kragen/shucks/checker instead of autozone. I think they might be cheaper, and parts are usually higher quality there. I bought a slave there and replaced it (super easy job, just make sure your REALLY tighten down the bolt where the fluid comes through the lines and enters the slave) and it's been perfect.
Thread
Thread Starter
Forum
Replies
Last Post
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM