NC 97 VLSD 5spd SE part out.
01-10-2016, 05:10 PM
#1
97 VLSD 5spd SE part out.
Welp the motor developed rod knock and im just done working on it, parts immediately for for sale, NO DIBS, NO HOLDING PARTS:
BC coilovers: SOLD!. Condition unknown i bought them used never got to install them before the motor went kaput so i cannot guarantee anything but what the PO promised me, he said they were fully working so this is purely as-is.
Dynomax VT muffler 2.25" BNIB: $60+shipping paid $100 took it out the box inspected in then put it back in the box. I intend the car to be a DD so performance was not as big of a goal as comfort was.
Kenwood DDX514 w/ ALL ACCESSORIES AND ADD ONS: $175+shipping. i could not get the bluetooth, but i did not try that hard so if you give it a shot you might be able to figure it out. This is is an older unit so be wary of that, dont expect the best thing ever but it is a cleaner look than most HU. It will also come with a prewired harness, the navigation module w/GPS antenna, andthe handbrake bypass kit:
New 9004 6000k HID kit from TRS: $75+shipped. HIDs. Nothing else needs to be said. My loss, your gain.
RC 440cc injectors: 100+shipping. All 6 are working fine, I just dont need them. I upgraded my boosted car to 650s.
The car itself Black on black. It is a generally clean body, has some rust on the body panels, typical inner fender issues i just had a rusted brake line fixed so be wary of that if you want the car. It was a former boosted car it has a hardwired emanage. It has a stock fully working Bose head unit. Maxspeed on AGX struts. Some RSB i dunno what it is but one is there. Ebay headers, y-pipe and full exhaust, it is loud. 00VI and "custom" CAI I made out of parts i had laying around with an Ebay oil catch can. Has some short throw shifter, a Fidanza flywheel and a new not even fully broken in Exedy OEM replacement clutch. It is wired for a subwoofer and amp which im unsure if i will leave it in there. It has a black leather interior, the drive side seat is not in the best shape but I will hold off for a while on ripping the car apart. If i were interested i would swap a 3.5 in the car and roll with that. I will also include a 3.5's SSIM and pathfinder throttle body. But basically you are paying for the parts on the car. It runs and drives and everything on it functions normally outside of the rod knock. $1000 takes it.
Once again, NO DIBS. First with cash first with parts. I never got a chance to drive this car NA except once just up and down my street. I replaced a brake caliper, bleed my brakes replaced a vac line and when i fired the car back up and clack clack squeak clickty-clack. This thread will be updated on the regular.
BC coilovers: SOLD!. Condition unknown i bought them used never got to install them before the motor went kaput so i cannot guarantee anything but what the PO promised me, he said they were fully working so this is purely as-is.
Dynomax VT muffler 2.25" BNIB: $60+shipping paid $100 took it out the box inspected in then put it back in the box. I intend the car to be a DD so performance was not as big of a goal as comfort was.
Kenwood DDX514 w/ ALL ACCESSORIES AND ADD ONS: $175+shipping. i could not get the bluetooth, but i did not try that hard so if you give it a shot you might be able to figure it out. This is is an older unit so be wary of that, dont expect the best thing ever but it is a cleaner look than most HU. It will also come with a prewired harness, the navigation module w/GPS antenna, andthe handbrake bypass kit:
New 9004 6000k HID kit from TRS: $75+shipped. HIDs. Nothing else needs to be said. My loss, your gain.
RC 440cc injectors: 100+shipping. All 6 are working fine, I just dont need them. I upgraded my boosted car to 650s.
The car itself Black on black. It is a generally clean body, has some rust on the body panels, typical inner fender issues i just had a rusted brake line fixed so be wary of that if you want the car. It was a former boosted car it has a hardwired emanage. It has a stock fully working Bose head unit. Maxspeed on AGX struts. Some RSB i dunno what it is but one is there. Ebay headers, y-pipe and full exhaust, it is loud. 00VI and "custom" CAI I made out of parts i had laying around with an Ebay oil catch can. Has some short throw shifter, a Fidanza flywheel and a new not even fully broken in Exedy OEM replacement clutch. It is wired for a subwoofer and amp which im unsure if i will leave it in there. It has a black leather interior, the drive side seat is not in the best shape but I will hold off for a while on ripping the car apart. If i were interested i would swap a 3.5 in the car and roll with that. I will also include a 3.5's SSIM and pathfinder throttle body. But basically you are paying for the parts on the car. It runs and drives and everything on it functions normally outside of the rod knock. $1000 takes it.
Once again, NO DIBS. First with cash first with parts. I never got a chance to drive this car NA except once just up and down my street. I replaced a brake caliper, bleed my brakes replaced a vac line and when i fired the car back up and clack clack squeak clickty-clack. This thread will be updated on the regular.
Last edited by Crusher103; 01-15-2016 at 04:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SWerVeDriVeR
5th Generation Classifieds (2000-2003)
55
07-01-2016 08:56 AM
13r1an
4th Generation Classifieds (1995-1999)
62
06-13-2016 10:16 AM