A32's Washer Nozzles vs. Murano's Washer Nozzles [Videos Inside]
06-14-2012, 01:05 PM
#1
Senior Member
Thread Starter
iTrader: (14)
Join Date: Jul 2010
Location: Los Angeles, CA
Posts: 1,867
A32's Washer Nozzles vs. Murano's Washer Nozzles [Videos Inside]
She now squirts almost across the whole car. 
Left, Murano. Right, A32.
UPDATE: See the two pillars next to the ">PBT<" letters? (not the clips/claw looking things) You have to trim down the left one. Right one will clear the hood.
Left Murano. Right A32
*Sorry for the background noise. There was a King's parade and damn helicopters and airplanes were all over the place.*
Both Murano Nozzles.
Its NOT a direct modification. You have to shave off one edge from each nozzle NOT the hood. Its easier to shave off plastic than metal
. I stabbed my finger twice, so be careful. Forgot to take pics of that part but you'll figure it out. Thanks for viewing. 
WARNING: I AM NOT RESPONSIBLE FOR ANY DAMAGES. DO THIS AT YOUR OWN RISK.
Left, Murano. Right, A32.
UPDATE: See the two pillars next to the ">PBT<" letters? (not the clips/claw looking things) You have to trim down the left one. Right one will clear the hood.
Left Murano. Right A32
*Sorry for the background noise. There was a King's parade and damn helicopters and airplanes were all over the place.*
Both Murano Nozzles.
Its NOT a direct modification. You have to shave off one edge from each nozzle NOT the hood. Its easier to shave off plastic than metal
. I stabbed my finger twice, so be careful. Forgot to take pics of that part but you'll figure it out. Thanks for viewing. WARNING: I AM NOT RESPONSIBLE FOR ANY DAMAGES. DO THIS AT YOUR OWN RISK.
Last edited by Shift_A32B; 12-07-2012 at 08:41 PM.
06-14-2012, 01:31 PM
#4
I got a pair of Murano (2005) Washer Nozzles for $27 at the dealer. (A32's were $26 a pop 
). She now squirts almost across the whole car.
Left, Murano. Right, A32.
Left Murano. Right A32
*Sorry for the background noise. There was a King's parade and damn helicopters and airplanes were all over the place.*
Both Murano Nozzles.
Its NOT a direct modification. You have to shave off one edge from each nozzle NOT the hood. Its easier to shave off plastic than metal. I stabbed my finger twice, so be careful. Forgot to take pics of that part but you'll figure it out. Thanks for viewing.
). She now squirts almost across the whole car. Left, Murano. Right, A32.
Left Murano. Right A32
*Sorry for the background noise. There was a King's parade and damn helicopters and airplanes were all over the place.*
Both Murano Nozzles.
Its NOT a direct modification. You have to shave off one edge from each nozzle NOT the hood. Its easier to shave off plastic than metal
. I stabbed my finger twice, so be careful. Forgot to take pics of that part but you'll figure it out. Thanks for viewing. 
you have my attention now. i'll might do this.
06-14-2012, 04:33 PM
#10
pop the hood. remove the clips holding the insulator on(if necessary on our cars i cant remember right now), to reveal the backside of our nozzles. get a small flat head screw driver or a small prying tool, and push the flares inward one side at a time, while pushing out towards the windshield.
also when removing the hoses from the nozzles, make sure you TWIST THE HOSE FIRST TO BREAK THE DRYROTTED SEAL. OTHER WISE YOU WILL MOST LIKELY SNAP THE NIPPLE ON THE NOZZLE. TRUST ME IT HAPPENS EVERY DAY.
also when removing the hoses from the nozzles, make sure you TWIST THE HOSE FIRST TO BREAK THE DRYROTTED SEAL. OTHER WISE YOU WILL MOST LIKELY SNAP THE NIPPLE ON THE NOZZLE. TRUST ME IT HAPPENS EVERY DAY.
06-14-2012, 05:41 PM
#13
Senior Member
Thread Starter
iTrader: (14)
Join Date: Jul 2010
Location: Los Angeles, CA
Posts: 1,867
Thank you sir.
Do it
06-15-2012, 08:23 AM
#20
Does anyone know what the part number is?
Never mind. I found it. Tri-Cities has the pair for $23.64 plus shipping.
www.nissanpartsasap.com
Never mind. I found it. Tri-Cities has the pair for $23.64 plus shipping.
www.nissanpartsasap.com
Last edited by NABU6; 06-15-2012 at 08:38 AM.
06-15-2012, 08:38 AM
#22
06-15-2012, 09:36 AM
#23
I was wondering what replacement ones I could use for the fan spray. I HATE the twin stream garbage. I can't seem to get the video to work, though that will not stop me from doing this mod.
06-15-2012, 09:43 AM
#24
THESE ONES DO THE FAN SPRAY!
Last edited by Amerikaner83; 06-15-2012 at 09:48 AM.
06-15-2012, 09:48 AM
#25
Senior Member
Join Date: Sep 2005
Location: San Antonio, TX
Posts: 366
Its threads like these that make me LOVE this forum. I would never have thought at all to swap out my nozzles for another model of car. Its a nice probably safe upgrade. ANd cheap. Cheap mods are the ****!
06-15-2012, 09:50 AM
#26
I recommend paying really close attention to when you shave the little tab thingies... I just used a pair of diagonal cutters and it didn't sit flush with the hood. I re-cut with an x-acto type knife (carefully!) and now they sit nice and flush.
06-15-2012, 10:15 AM
#27
06-15-2012, 10:33 AM
#28
Senior Member
Thread Starter
iTrader: (14)
Join Date: Jul 2010
Location: Los Angeles, CA
Posts: 1,867
Not as much as I am with your headlights.
Videos are working fine..
To me it was safe (I just stabbed my self once cause I didn't pay attention). It is cheap, cause the A32 nozzles go for double the price each and they have a lame pattern.
I only used a flat-head screwdriver
"probably safe"..I certainly hope so!
I recommend paying really close attention to when you shave the little tab thingies... I just used a pair of diagonal cutters and it didn't sit flush with the hood. I re-cut with an x-acto type knife (carefully!) and now they sit nice and flush.
I recommend paying really close attention to when you shave the little tab thingies... I just used a pair of diagonal cutters and it didn't sit flush with the hood. I re-cut with an x-acto type knife (carefully!) and now they sit nice and flush.
Last edited by Shift_A32B; 06-15-2012 at 10:35 AM.
06-15-2012, 09:06 PM
#30
Senior Member
Thread Starter
iTrader: (14)
Join Date: Jul 2010
Location: Los Angeles, CA
Posts: 1,867
From my understanding the 1st gen murano will be easy to work on. I got a pair from the 2005. Don't forget, this isn't a direct fit. You have to shave off one edge from each nozzle. I managed to do it with a flat head screwdriver. Took me about 10-15 minutes for both. I forgot to take pictures of the edge I'm talking about but if you get a pair, you'll figure it out.
06-16-2012, 12:03 PM
#36
Senior Member
Thread Starter
iTrader: (14)
Join Date: Jul 2010
Location: Los Angeles, CA
Posts: 1,867
**I ordered a pair for one of our members, hopefully I'll get them on Monday. Before I ship them out to the org member, I'll take some pics on the edge I've been talking about to shave off. Stay tuned.**
06-24-2012, 06:33 PM
#38
Got mine and installed them on Saturday. For the record I had to use a little bit of double sided 3M tape on the bottoms..they were slightly loose.
Last edited by tigersharkdude; 06-24-2012 at 06:36 PM.
06-25-2012, 05:36 PM
#40
If you like the nozzles, then you guys may also be interested in strengthening the springs in your wiper arms too........
http://surewipe.com/options.php?marq...e=MAXIMA&lg=en
I only use one on the drivers side arm.
DW
http://surewipe.com/options.php?marq...e=MAXIMA&lg=en
I only use one on the drivers side arm.
DW