Spacer For Front Strut Tower Bar?
#1
Spacer For Front Strut Tower Bar?
During the process of, again, rendering a bunch of under-hood stuff "in pieces", I removed my strut tower bar that's probably been installed for the past 5 or 7 years.
Once I removed the passenger side mounting plate, to my horror I saw that the portion of the bracket that over-hangs my low pressure side A/C hose and been in contact with and has been marring the hard-line portion of the A/C hose ... right there:
Anyway, does anyone have any leads on a spacer appropriate for this situation?
Something like this:
Once I removed the passenger side mounting plate, to my horror I saw that the portion of the bracket that over-hangs my low pressure side A/C hose and been in contact with and has been marring the hard-line portion of the A/C hose ... right there:
Anyway, does anyone have any leads on a spacer appropriate for this situation?
Something like this:
#3
There is supposed to be an OEM bracket on the side of the strut tower which holds the AC line in place, and protects it with a foam/rubber insulator. I think I see it lurking within your red circle. You can loosen the bolt that secures it to the strut tower and slide it down a 1/4" to give the AC line adequate clearance.
Also, the AC line is soft aluminum. Very gently, you can simply bend the AC line just a little and you'll have the adequate clearance to prevent rubbing.
Also, the AC line is soft aluminum. Very gently, you can simply bend the AC line just a little and you'll have the adequate clearance to prevent rubbing.
Thread
Thread Starter
Forum
Replies
Last Post
maxmonkey
3rd Generation Maxima (1989-1994)
4
06-20-2001 12:26 PM