bkies

I have several things that i need to replace and fix and my 96 maxima. I am going to replace the radiator the EGR valve the knock sensor, coil packs, plugs, and the rear valve cover gasket. I know its a lot of work and my question is; would it be easier to drop the entire engine out of the car to replace this stuff or just work on it with the engine in the car. I will be working at a shop and have everything i will need just needing some opinions on this.

tosheto

iTrader: (5)

Not worth it I think. I have done all those things you have mentioned and it will not be that hard or take as long as taking the engine out. You said you will do it at a shop and that will make your job easier. Plus you can do half of the repairs one day and the rest another day. If you pull the motor the car will not be running.

Max139617

iTrader: (9)

As for the radiator,knock,coilpacks and plugs you DO NOT need to drop the engine. I don't know about the egr and the rear gasket.

Nealoc187

iTrader: (23)

for those simple things no way would i drop the engine.

nsnrider

iTrader: (59)

+1

All that work can be done under 3 hours time, tops.

maxinout93

no all those things can be done with the engine in the car

EvoTillIDie

iTrader: (1)

No way....save yourself the time & hassle...keep the engine in

Snypa

iTrader: (35)

not worth dropping. all those things are very much accessible.

Trini Boom

iTrader: (5)

You want to drop an engine for these little things?? Why couldn't we access a shop to do things like the RMS and Rear timing cover o-rings??....

Max streets

iTrader: (11)

3.5swap then drop it other than that no.

maxfever1987

iTrader: (93)

Keep the engine in and do everything you need done, once the uim if of everything else in easily accessible