Need help with UIM cooling lines
#1
Need help with UIM cooling lines
Hello all, I am changing valve cover gaskets on my 1996 Maxima and upon putting everything back together I have ran into a problem, the two cooling lines on the back of the intake manifold were rotted and when I pulled the intake off I didn't really pay attention as to where they went to. That being said, I have the new lines but I don't know where to hook them up at.
So if anyone can maybe help me get these cooling lines hooked up I would really appreciate it! 😋 or maybe lead me in the direction of a good diagram of how they are ran
If need pictures let me know and il do my best to get them for you
So if anyone can maybe help me get these cooling lines hooked up I would really appreciate it! 😋 or maybe lead me in the direction of a good diagram of how they are ran
If need pictures let me know and il do my best to get them for you
#7
If your facing the back of the manifold there should be one hose coming from the throttle body going to nipple on the left side of the manifold and the other hose should come from the nipple on the right side of the manifold going to a nipple coming from the headers and this connection should be close together like a C shape
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM