4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

P1320 with misfire that goes away

Thread Tools
 
Search this Thread
 
Old 09-12-2016, 08:53 PM
  #1  
Newbie - Just Registered
Thread Starter
 
ahuther19's Avatar
 
Join Date: Sep 2016
Posts: 3
P1320 with misfire that goes away

Hey all,

I recently picked up a 1999 Max GLE with 90k miles on it for a steal. However, its come to my attention that this car seems to have issues with coil packs, which may be the reason its throwing the 1320. What I don't understand is the intermittent miss that seems to come and go as it pleases, usually right after I crank it. Any help guys?
ahuther19 is offline  
Old 09-12-2016, 11:54 PM
  #2  
Senior Member
 
JoshG's Avatar
 
Join Date: May 2013
Posts: 1,560
Usually P1320 means that the owner had incorrect ignition coil brand installed in them. This probably is why its still misfiring. Install Hitachi coils (which are OEM) and the code/misfire should go away.
JoshG is offline  
Old 09-13-2016, 12:10 AM
  #3  
Administrator
iTrader: (43)
 
The Wizard's Avatar
 
Join Date: Feb 2002
Location: Southern California
Posts: 16,636
^Not necessarily true.

Although the coilpack(s) could be bad, so could the injector(s) or even the FPR in this case.

Start with the good ol' unplug the coilpack trick on each cylinder and listen for a change in RPM. If no change, then you found the cylinder that's acting up.

Then swap coillpacks and see if the silence follows to that cylinder. If so, you found your coilpack. If not, then most likely the injector at the original cylinder is bad.

Start with this and report back.
The Wizard is offline  
Old 09-15-2016, 08:28 PM
  #4  
Newbie - Just Registered
Thread Starter
 
ahuther19's Avatar
 
Join Date: Sep 2016
Posts: 3
Hey guys,

Gonna test that this weekend when I have a spare moment. My Max missed again tonight, right after I cranked it up to go to the grocery store. After I came out 5 min later, it wasn't missing anymore, and rode smooth. My OBD reader is now showing a miss on #6, the P0306 code, along with the P1320. Is this my culprit? Last time it missed and I changed a coil, it threw the P0304, and the #4 coil was screwed.
ahuther19 is offline  
Old 09-16-2016, 06:22 AM
  #5  
Member
 
slfalco's Avatar
 
Join Date: Nov 2002
Location: Hyde Park, NY
Posts: 237
Way back when, my 99 was misfiring and set P1320, it never set another code to pinpoint the cylinder.. I ended up replacing all 6 coils with OEM, never had another problem, that was 120K miles ago...
slfalco is offline  
Old 09-16-2016, 12:32 PM
  #6  
Administrator
iTrader: (43)
 
The Wizard's Avatar
 
Join Date: Feb 2002
Location: Southern California
Posts: 16,636
Originally Posted by ahuther19
Hey guys,

Gonna test that this weekend when I have a spare moment. My Max missed again tonight, right after I cranked it up to go to the grocery store. After I came out 5 min later, it wasn't missing anymore, and rode smooth. My OBD reader is now showing a miss on #6, the P0306 code, along with the P1320. Is this my culprit? Last time it missed and I changed a coil, it threw the P0304, and the #4 coil was screwed.
Follow my advice above and report back.
The Wizard is offline  
Old 09-16-2016, 12:34 PM
  #7  
Member
 
slfalco's Avatar
 
Join Date: Nov 2002
Location: Hyde Park, NY
Posts: 237
If you have original coils on a 99, change them all if you value your sanity...
slfalco is offline  
Old 09-16-2016, 02:04 PM
  #8  
Senior Member
 
JoshG's Avatar
 
Join Date: May 2013
Posts: 1,560
I agree, I had to change my coils back in June this year cause it was misfiring, I bought 6 brand new OEM hitachi and no problems at all after 3 months. It seems like all the original coils on these cars are starting to go and need replacing. I would just replace all and save yourself a headache, it did for me.
JoshG is offline  
Old 09-19-2016, 07:00 PM
  #9  
Member
 
komik's Avatar
 
Join Date: Jan 2008
Location: Dallas, TX
Posts: 268
One of the coils started to go bad on my '96, but not frequently enough to trip the CEL. Not knowing which one, I replaced all six with the spare set I had from my '95 parts car. No problems since. I know I still have at least five good spares, I just don't know which is which.
komik is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cash94
5th Generation Classifieds (2000-2003)
7
09-22-2016 02:44 PM
realmac
8th Generation Maxima (2016-)
8
09-05-2016 06:30 PM
Harry Harrison
4th Generation Maxima (1995-1999)
1
08-14-2016 09:43 AM



Quick Reply: P1320 with misfire that goes away



All times are GMT -7. The time now is 02:30 PM.