Help!!! Those with SARD fpr
#1
Help!!! Those with SARD fpr
ok so i installed my fpr yesterday. (thanks maxbandit and chinzilla) what i want to know is where did you guys who have one installed mount the fpr at.
i can't realy pinpoint a good location for it.
i have a cattman upperintake pipe with a jwt air filter an a stillen strut bar. 99 se-l
do to a leaking gauge at the test port i had to set the fuel pressure and remove the gauge. i guess my gauges will go in line with the fuel hoses.
so know i am searching for a good mounting location for the fpr.
thanks
frank
i can't realy pinpoint a good location for it.
i have a cattman upperintake pipe with a jwt air filter an a stillen strut bar. 99 se-l
do to a leaking gauge at the test port i had to set the fuel pressure and remove the gauge. i guess my gauges will go in line with the fuel hoses.
so know i am searching for a good mounting location for the fpr.
thanks
frank
#2
Supporting Maxima.org Member
iTrader: (10)
I have mounted mine in two locations so far. First was almost where the old one was except that you have to move it a bit because of the hose etc.
The other was on the other end of the metal pipe that the original fpr connected to on the return side. It comes out very close to the filter and I connected in there. Its harder to set but you will probably only adjust once so no problem and its out of the way and no one can see it.
The other was on the other end of the metal pipe that the original fpr connected to on the return side. It comes out very close to the filter and I connected in there. Its harder to set but you will probably only adjust once so no problem and its out of the way and no one can see it.
Thread
Thread Starter
Forum
Replies
Last Post