CT Full part out, cattman, stillen, NWP, Vortech
#1
Full part out, cattman, stillen, NWP, Vortech
Since no one will ever buy this gem for anywhere close to what it's worth so I've made the hard decision of parting it out.
Here's a full description of what's for sale.
http://hartford.craigslist.org/pts/5149369593.html
Copied and pasted from my craigslist post.
Ive had this 00 maxima SE 5 speed for a little over 6 years, absolutely nothing wrong with it but it's gotten to the point that I can't sell the car as I'd be taking such a huge loss so im parti g it out. I recently aquired a 350z and decided to build that instead.
parts consists of the following plus much more.
95-01 maxima VQ30DE Stillen Supercharger Setup complete kit. Everything needed to bolt right up with extras. $2500 picked up.
06 Vq35de with 74k modified to drop right into any 95-01 maxima. also installed 350z Rev up cams while it was apart. $1500
02-03 heated black leather with door panels $400 or $300 with out panels
titanium edition chrome door sills $80
titanium edition Bose factory headunit with built in 6 cd changer with $60
02-03 6 speed shifter trim with fresh boot $50
AEM uego wide band with sensor $150
glowshift boost guage $60
cooling mist stage 2 methanol injection kit with optional CMGS digital guage/controller $350
Stillen big brake kit with 13" rotor. used set of hawk pads with good life $450
Tein SS coilovers $650
progress rear sway bay $160
Stillen batt tie down $500
Stillen Front strut bar $ 160
Retrofitted headlights with bulbs $ 350
5.5 front bumper and lip with grill $ 250
5 speed trans with phantom grip LSD $ 550
Fidanza flywheel $ 175
ACT pressure plate $ 100
Emanage ultimate with pnp harness $ 700
Rear 20th AE rear lip with flaps $ 200
SFR intake manifold for Vq35 $650
Cattman V3 headers with skid plate $700
Cattman V1 3 " catback $625
Pathfinder TB with Stephen Max adapter $240
optima red top $150
NWP 5 piece phenolic spacer setup $225
Titanium edition pedals with 350z dead pedal sold
350z track edition rays engineering wheels with good 245/40/18 Dunlop direzza tires $950
custom fuel setup (will not split up) blue billet aluminium fuel rails with dual feed and dual return setup with black AN fittings. Stillen Adjustable fuel pressure regulator, Bosch 660cc injectors and a Aeromotive 320lph in tank fuel pump $700
energy suspension poly mounts already pressed $170
huge resonated test pipe with 3" inlet/outlet
regular parts like doors, hood, trunk etc will be for sale also. so just let me know what you need. these are quality and rare parts that aren't easy to come by. I will not respond to low ballers. don't inquire unless your ready to buy with cash in hand. text is the best way to reach me.
Here's a full description of what's for sale.
http://hartford.craigslist.org/pts/5149369593.html
Copied and pasted from my craigslist post.
Ive had this 00 maxima SE 5 speed for a little over 6 years, absolutely nothing wrong with it but it's gotten to the point that I can't sell the car as I'd be taking such a huge loss so im parti g it out. I recently aquired a 350z and decided to build that instead.
parts consists of the following plus much more.
95-01 maxima VQ30DE Stillen Supercharger Setup complete kit. Everything needed to bolt right up with extras. $2500 picked up.
06 Vq35de with 74k modified to drop right into any 95-01 maxima. also installed 350z Rev up cams while it was apart. $1500
02-03 heated black leather with door panels $400 or $300 with out panels
titanium edition chrome door sills $80
titanium edition Bose factory headunit with built in 6 cd changer with $60
02-03 6 speed shifter trim with fresh boot $50
AEM uego wide band with sensor $150
glowshift boost guage $60
cooling mist stage 2 methanol injection kit with optional CMGS digital guage/controller $350
Stillen big brake kit with 13" rotor. used set of hawk pads with good life $450
Tein SS coilovers $650
progress rear sway bay $160
Stillen batt tie down $500
Stillen Front strut bar $ 160
Retrofitted headlights with bulbs $ 350
5.5 front bumper and lip with grill $ 250
5 speed trans with phantom grip LSD $ 550
Fidanza flywheel $ 175
ACT pressure plate $ 100
Emanage ultimate with pnp harness $ 700
Rear 20th AE rear lip with flaps $ 200
SFR intake manifold for Vq35 $650
Cattman V3 headers with skid plate $700
Cattman V1 3 " catback $625
Pathfinder TB with Stephen Max adapter $240
optima red top $150
NWP 5 piece phenolic spacer setup $225
Titanium edition pedals with 350z dead pedal sold
350z track edition rays engineering wheels with good 245/40/18 Dunlop direzza tires $950
custom fuel setup (will not split up) blue billet aluminium fuel rails with dual feed and dual return setup with black AN fittings. Stillen Adjustable fuel pressure regulator, Bosch 660cc injectors and a Aeromotive 320lph in tank fuel pump $700
energy suspension poly mounts already pressed $170
huge resonated test pipe with 3" inlet/outlet
regular parts like doors, hood, trunk etc will be for sale also. so just let me know what you need. these are quality and rare parts that aren't easy to come by. I will not respond to low ballers. don't inquire unless your ready to buy with cash in hand. text is the best way to reach me.
#7
pics of the brakes to ranupnya@yahoo.com
#8
Prices are not shipped as shipping varies from area to area. I can work with people to find the cheapest shipping available.
Not all prices are set in stone but not all negotioble. Willing to work with people that buy multiple things.
Not all prices are set in stone but not all negotioble. Willing to work with people that buy multiple things.
#13
Cattman headers are off the market at the moment. Might keep them for another project.
Catback sold
Fuel system sold
Front bumper sold
Pass side rear caliper sold
Control arms with es bushings sold
Coilovers sold
Stillen Tie down sold
Res test pipe sold
Rear bumper sold
Catback sold
Fuel system sold
Front bumper sold
Pass side rear caliper sold
Control arms with es bushings sold
Coilovers sold
Stillen Tie down sold
Res test pipe sold
Rear bumper sold
#19
Supercharger is complete minus FMU and I wouldn't run it if I had one anyway. Blower kit came off the car today and is all boxed up in storage.
Engine is sold
Flywheel sold
Headers sold
Guages sold
Meth kit sold
Engine is sold
Flywheel sold
Headers sold
Guages sold
Meth kit sold
#20
Dude, your prices are expensive. You can get a brand new NWP 5 pc spacer set for the same price. And I just bought a brand new Progress anti-sway bar for $170; only $10 more than your used one.
#27
#29
Do you have the flywheel timing ringfor the vq30de? im in desperate need of one.. I just did a 5 speed vlsd swap on my 99 and won't crank due to the timing ring being all chipped and bent😕 if you can lmk it would be greatly appreciated if you want you can text me 3159390656 I'm in central NY btw
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 12:46 PM
Team STILLEN
Autocrossing and Road Course Racing
0
08-10-2015 04:29 PM