5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Can't find my year!

Thread Tools
 
Search this Thread
 
Old 08-30-2014, 06:56 PM
  #1  
Newbie - Just Registered
Thread Starter
 
erau_00's Avatar
 
Join Date: Aug 2014
Location: Savannah, ga
Posts: 4
Can't find my year!

Just bought my wife an 03 Maxima. Check engine light was on, ran a diagnostic, found it to be the knock sensor. buy the part, go to install and find that the knock sensor harness has beem cut. cuss a little, get online to find one and all I can find is no newer than a 1999 model harness! does anyone know if this will fit the 03? or where I can find a knock sensor wiring harness for my year model? Any help would be invaluable!
erau_00 is offline  
Old 08-30-2014, 07:15 PM
  #2  
Supporting Maxima.org Member
 
barristan's Avatar
 
Join Date: Sep 2005
Location: NH
Posts: 311
When you say it was cut, is the whole harness missing?
barristan is offline  
Old 08-30-2014, 07:22 PM
  #3  
Senior Member
iTrader: (2)
 
DennisMik's Avatar
 
Join Date: Apr 2004
Location: Plano, TX
Posts: 10,649
The check engine light does not come on for the knock sensor. What other code(s) do you have?
DennisMik is offline  
Old 08-30-2014, 08:52 PM
  #4  
Bad *** Newb
iTrader: (7)
 
Child_uv_KoRn's Avatar
 
Join Date: Jun 2006
Posts: 4,943
Originally Posted by DennisMik
The check engine light does not come on for the knock sensor. What other code(s) do you have?
Nor would you buy a car that doesn't have a knock sensor connected (that's not simmed). It would run like crap and be slow as ****.
Child_uv_KoRn is offline  
Old 08-30-2014, 10:15 PM
  #5  
Supporting Maxima.org Member
iTrader: (2)
 
1996blackmax's Avatar
 
Join Date: Jan 2003
Location: San Diego, Ca
Posts: 4,534
Did you test drive the car before buying it?

Check with Courtesy Nissan to see if they can help you, give them a call.

http://www.courtesyparts.com
1996blackmax is offline  
Old 08-31-2014, 03:59 AM
  #6  
Newbie - Just Registered
Thread Starter
 
erau_00's Avatar
 
Join Date: Aug 2014
Location: Savannah, ga
Posts: 4
P0328 was the code. The harness is there just cut, literally. And it doesn't run bad , yet the check engine light didn't come on for a few weeks after I bought it, how is this possible with a cut Harness?? I removed the old sensor, but don't want to put in the new one until I get the harness. I have large hands and it was hard enough the first time.. Is it OK to drive like that?
erau_00 is offline  
Old 08-31-2014, 04:05 AM
  #7  
Newbie - Just Registered
Thread Starter
 
erau_00's Avatar
 
Join Date: Aug 2014
Location: Savannah, ga
Posts: 4
Originally Posted by Child_uv_KoRn
Nor would you buy a car that doesn't have a knock sensor connected (that's not simmed). It would run like crap and be slow as ****.
I have never heard of a knock sensor before this car, all I have ever had are v8 trucks. Test drove, was peppy for the size engine, no warning lights on dash. Check engine light didn't come on until after a few weeks. That it still a mystery to me
erau_00 is offline  
Old 08-31-2014, 04:17 AM
  #8  
Senior Member
iTrader: (1)
 
colt149's Avatar
 
Join Date: Jul 2013
Location: Dumont, NJ
Posts: 463
knock sensor

Originally Posted by erau_00
I have never heard of a knock sensor before this car, all I have ever had are v8 trucks. Test drove, was peppy for the size engine, no warning lights on dash. Check engine light didn't come on until after a few weeks. That it still a mystery to me
Read this page 310

http://boredmder.com/FSMs/Nissan/Maxima/2003/EC.pdf

I spoke to courtesyparts 3 months ago about the availability of knock sensor harness for 2002-2003, unfortunately they are not selling it. The only way is to get it in the junkyard or classified section of the org. The knock sensor alone cost around $200.00 .
colt149 is offline  
Old 08-31-2014, 10:08 AM
  #9  
Bad *** Newb
iTrader: (7)
 
Child_uv_KoRn's Avatar
 
Join Date: Jun 2006
Posts: 4,943
If it indeed is damaged just sim it with a 500K resistor. The connector is right there next to block. Fold up the leads a bit and push it in, then tape it up. Use 93 octane in the summer and you won't have any problems. Or get it a junkyard if you can find an 02/03.

You should really inspect the area b/c this doesn't make any sense.
Child_uv_KoRn is offline  
Old 08-31-2014, 01:30 PM
  #10  
Senior Member
iTrader: (2)
 
DennisMik's Avatar
 
Join Date: Apr 2004
Location: Plano, TX
Posts: 10,649
The knock sensor is part # 22060-2Y000. It is $107.99 at Courtesy Nissan.

http://www.courtesyparts.com/22060p-...4-p-90236.html

This part fits the listed vehicles and their options:

Altima 2002-2005 6 Cyl 3.5L VQ35DE
Maxima 2000-2003 6 Cyl 3.0L VQ30DE
Maxima 2002-2003 6 Cyl 3.5L VQ35DE
Pathfinder 2000-2003 6 Cyl 3.5L VQ35DE
DennisMik is offline  
Old 08-31-2014, 02:06 PM
  #11  
Senior Member
iTrader: (1)
 
colt149's Avatar
 
Join Date: Jul 2013
Location: Dumont, NJ
Posts: 463
Originally Posted by DennisMik
The knock sensor is part # 22060-2Y000. It is $107.99 at Courtesy Nissan.

http://www.courtesyparts.com/22060p-...4-p-90236.html

This part fits the listed vehicles and their options:

Altima 2002-2005 6 Cyl 3.5L VQ35DE
Maxima 2000-2003 6 Cyl 3.0L VQ30DE
Maxima 2002-2003 6 Cyl 3.5L VQ35DE
Pathfinder 2000-2003 6 Cyl 3.5L VQ35DE
That part # 22060-2Y000 is for 6th gen A34
The right part # : 22060-A33B001 5th gen A33
http://www.courtesyparts.com/22060p-...3-p-45462.html
I know this because I just bought one.

Last edited by colt149; 09-01-2014 at 06:46 AM.
colt149 is offline  
Old 09-02-2014, 01:48 PM
  #12  
Senior Member
 
Costee's Avatar
 
Join Date: Sep 2010
Location: Lagos, Nigeria
Posts: 862
Originally Posted by colt149
That part # 22060-2Y000 is for 6th gen A34
The right part # : 22060-A33B001 5th gen A33
http://www.courtesyparts.com/22060p-...3-p-45462.html
I know this because I just bought one.
False. It's for the 5th/5.5 Gen. Check again it's stated there that it fits 2000-2003 Max (A33B). The part numbber you quoted is Courtesy Parts' own designation.
Costee is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
homeyclaus
Maximas for Sale / Wanted
1
09-03-2015 06:15 PM
MAXSE5SPD
Other For Sale/Wanted
2
08-23-2015 12:06 PM
ViciousVQ30
4th Generation Classifieds (1995-1999)
0
08-05-2015 05:40 PM
xUNIxPanther
7th Generation Maxima (2009-2015)
7
08-05-2015 09:31 AM
BassAddictJ
7th Generation Maxima (2009-2015)
5
08-04-2015 11:38 AM



Quick Reply: Can't find my year!



All times are GMT -7. The time now is 02:49 AM.