6th Generation Maxima (2004-2008)Discussion of the 6th generation Maxima. Come see what others are saying.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
Where can one purchase Nissan emblems? I've got crappy gold emblems and hate them (looks too 'blingy'). Want to get standard chrome emblems - both grille emblem and all trunk emblems (ie, maxima, 3.5 sl, nissan, etc). I'm assuming that I could go through the dealership, but would like any other ideas. Any links would be appreciated.
Missjane: Its a piece of cake to remove emblems. You take a hairdryer and I used a rag to surround the target letter to protect the paint from the heat. I heated the emblem til it got loose. Then I pryed it off with my fingers. Sometimes u have to rock it back and forth. Takes prolly 2-4 min depending on each letter. I had my whole back area debadged in about 30 min. Then you remove the glue with Goof off, and polish and wax. Are you sure you want to put emblems back on .I removed mine cuz I like that clean look. Check out my pics on the links on my signature.
That does look good, Deus....I'll have to think about that. So, what about the round NISSAN emblem? Follow the same instructions as above? And, how do you get them back on?
The round emblem should be the same also. I really dont know cuz I havent removed mine, just everything else. To put them back on is easy, just peel and stick. When you buy it, it comes with the same adhesive, just peel the paper backing and stick it back on. Be careful though to make sure you put it on exactly where you want it. The first try will most likely be your last...
Miss Jane: I took the NISSAN logo off the back and discovered that there were two holes. I immediately stuck the logo back on. Its MUCH more difficult to remove that logo because its larger than the letters. Took probably 2-3 times as long to remove. I put it back in place before the tape on the back solidified. At some point, Im taking it off and filling in the holes. I really think logos are ugly and I dont need them to tell me what car I have and neither does anyone else. Also, it easier to wax when u dont have logos in the way. I really like the smoooooth look.