etoitopi

Hi there!

I recently purchased some 6th gen Maxima sideview mirrors (a pair) with auto dimming and folding. The mirrors each have a 16 pin harness with 13 pins being used.

According to the FSM, I have no idea what I'm looking at. I've looked at the FSM for 04-08 and couldn't find the connector and the colors that corroborate with the mirror.

This is what I have with regards to the colors on the harness, from the terminal side -

For the sake of argument I'm going to mark the pinout as such:

1 2 3 ---------------- 4 5 6
7 8 9 10 11 12 13 14 15 16

Drivers side has a silver dot scheme running down the wires, the passenger side does not.

1. Black
2. Black
3. Empty
4. Empty
5. Yellow
6. Grey
7. Red
8. Brown
9. Purple
10. Green
11. Blue
12. White / Blue Stripe
13. White / Black Stripe
14. White / Green Stripe
15. White
16. Blank

Since I'm installing these mirrors onto a different car I could really use a hand figuring out what these wires go to, so I can have the controls work, heat work, and the auto dimming feature work as well (yes, my rearview mirror dims so I'm going to tap from that)

I've checked the GW section of the FSM and it looks like my connectors are D4 on the drivers side and D107 on the passenger side.

The mirrors say they're from an '05 however it looks like the 07 or 08 harness matches up the best as it is a 16 pin connector, 04/05 have a smaller connector (14 pin maybe? and 06 has 16 pin but all pins are taken). 07/08 has a 16 pin, the top pinout matches but the missing pin is on the left instead of the right as I have it. The colors don't match on the schematic either.

So.. if anyone has any idea I'd be eternally grateful. Seriously, it would be a huge help.

Thank you kindly!