Replace A/C Bearing
#1
Replace A/C Bearing
Anybody have a tutorial or know how to replace this? I'm not even sure what this part is. I asked what a squealing noise upon startup that goes away when i give it gas is and was told it was an A/C compressor bearing on its way out. Folks said it could be replaced but didn't really give much explanation and said it is kinda hard to do. So is it worth the trouble? And if so can someone explain how to do it?
#2
here's a very detailed how-to: http://www.vqpower.com/v2////article...article_id=112
before you proceed, make sure it is indeed the bearing. once you start hearing the noise, turn the a/c off. if it disappears, it might be it, if it doesn't - look somewhere else. my compressor had a bad bearing and would make a noise only with the a/c on.
good luck!
before you proceed, make sure it is indeed the bearing. once you start hearing the noise, turn the a/c off. if it disappears, it might be it, if it doesn't - look somewhere else. my compressor had a bad bearing and would make a noise only with the a/c on.
good luck!
#3
Yeah i haven't given it a very thorough check yet. I'm going to get belts replaced first and make sure it's not something that simple. I also heard it could be a water pump issue, does this sound feasible?
#6
I am in the process of doing this same exact thing right now. I didnt even know that this writeup existed.
Only thing I can't do is fit the large snap ring back onto the "field coil". I've tried 3 different tools without any luck...I was going to head back to Sears tmrw and try and find a better one.
Also, I just bought a used compressor from an .org member here, removed the clutch and pulley and made sure the bearings were good, and will reinstall in reverse order. Might not be as good as brand new bearings, but the one I got has good bearings so I am not worried. And for the price I paid, you can't go wrong.
Only thing I can't do is fit the large snap ring back onto the "field coil". I've tried 3 different tools without any luck...I was going to head back to Sears tmrw and try and find a better one.
Also, I just bought a used compressor from an .org member here, removed the clutch and pulley and made sure the bearings were good, and will reinstall in reverse order. Might not be as good as brand new bearings, but the one I got has good bearings so I am not worried. And for the price I paid, you can't go wrong.
#9
I am in the process of doing this same exact thing right now. I didnt even know that this writeup existed.
Only thing I can't do is fit the large snap ring back onto the "field coil". I've tried 3 different tools without any luck...I was going to head back to Sears tmrw and try and find a better one.
Also, I just bought a used compressor from an .org member here, removed the clutch and pulley and made sure the bearings were good, and will reinstall in reverse order. Might not be as good as brand new bearings, but the one I got has good bearings so I am not worried. And for the price I paid, you can't go wrong.
Only thing I can't do is fit the large snap ring back onto the "field coil". I've tried 3 different tools without any luck...I was going to head back to Sears tmrw and try and find a better one.
Also, I just bought a used compressor from an .org member here, removed the clutch and pulley and made sure the bearings were good, and will reinstall in reverse order. Might not be as good as brand new bearings, but the one I got has good bearings so I am not worried. And for the price I paid, you can't go wrong.
Although when I did replace the one last year on my original compressor, it sounded soo quiet..like you couldn't even hear the pulleys at all. Just need to find the proper clutch removal tool for this compressor.
#10
Yeah I understand where you are coming from as I did the same thing last year when bent the clutch plate. Bought a used one for $80 and this summer back to square one with the noise. When it rains and I have it on and water finds its way through the splash shields, noise like no tomorrow.
Although when I did replace the one last year on my original compressor, it sounded soo quiet..like you couldn't even hear the pulleys at all. Just need to find the proper clutch removal tool for this compressor.
Although when I did replace the one last year on my original compressor, it sounded soo quiet..like you couldn't even hear the pulleys at all. Just need to find the proper clutch removal tool for this compressor.
#11
Yeah and this is what I am afraid of. Once that clutch plate is bent, your whole compressor is done and will need to get a used one because that clutch is not sold separate. This is why I need to find the proper tool for this and definitely help out a lot of people on the .org here with this problem.
#12
Yeah and this is what I am afraid of. Once that clutch plate is bent, your whole compressor is done and will need to get a used one because that clutch is not sold separate. This is why I need to find the proper tool for this and definitely help out a lot of people on the .org here with this problem.
Or if worst comes to worst, you bend the clutch and you need to buy another used compressor, regardless of the shape of the bearings, or the functionality of the unit. They are dirt cheap.
#13
So, while you are talking clutches... are they solenoid actuated? My AC is not working and while listening for the solenoid while my son pushed the AC button on and off, I didn't hear a thing. Should I hear a loud click when the AC goes on? I'm not sure if the clutch is not engaging or if the system needs a re-charge.
#14
Glad someone made this thread, saved me some searching time lol
2 weeks ago we had a real big storm in Chicago with a good amount of flooding, truth is that I drove through a street that had about 1 foot of water and since then my ac compressor bearing is making noise. Its definitely coming from the A/C so lets see how this goes!
2 weeks ago we had a real big storm in Chicago with a good amount of flooding, truth is that I drove through a street that had about 1 foot of water and since then my ac compressor bearing is making noise. Its definitely coming from the A/C so lets see how this goes!
Thread
Thread Starter
Forum
Replies
Last Post
MattWithTheMaxima
5th Generation Maxima (2000-2003)
14
06-30-2017 01:06 PM