Rims on their 7th Gen Max MEGA Thread!
07-01-2015, 09:04 PM
#2961
Your speedometer won't be accurate and the ride will be a lot worse.
Stick with the correct size tires.
It is stupid, very, very, stupid t try and stretch tires on an 8.5, especially for this car.
Stick with the correct size tires.
It is stupid, very, very, stupid t try and stretch tires on an 8.5, especially for this car.
07-01-2015, 09:21 PM
#2962
Newbie - Just Registered
Join Date: Jul 2014
Location: South Jersey
Posts: 14
07-07-2015, 08:36 AM
#2963
Junior Member
Join Date: Jun 2010
Location: escondido, ca
Posts: 27
Hey guys,
I just got summer wheels to replace the winter tires I put on my stock rims last November.
I'm a huge fan. They fit like a dream and ride super smooth.
20x8.5 Avarus AV10 +35 offset rims wrapped in 245/35ZR-20 Sumitomo HTR Z III rubber. Got a great deal on the whole set.
I just got summer wheels to replace the winter tires I put on my stock rims last November.
I'm a huge fan. They fit like a dream and ride super smooth.
20x8.5 Avarus AV10 +35 offset rims wrapped in 245/35ZR-20 Sumitomo HTR Z III rubber. Got a great deal on the whole set.
09-12-2015, 12:45 AM
#2970
Vossen CV1 in Graphite against Brilliant Silver. 20x9 (I think et 38) on 245/30/20 rubber in front, 20x10.5 (I think et 45) on 275/30/20 rubber in the rear. I got the wheels from another 7th gen owner, so I'm not 100% on offset. Car sits on BC Coilovers with a modest lower.
Last edited by maximase86; 09-12-2015 at 12:50 AM.
09-16-2015, 03:20 PM
#2975
The previous owner did because he had rubbing issues when having to put 5mm spacers on to clear the Akebono BBK. I haven't changed it because the tires still have a lot of life left. I will deal with changing out the tires later.
S
S
09-17-2015, 01:15 PM
#2976
Supporting Maxima.org Member
Join Date: Nov 2000
Location: Reno, NV
Posts: 2,909
10-15-2015, 07:46 AM
#2977
Newbie - Just Registered
Join Date: Oct 2015
Posts: 4
I FINALLY DID IT....after the late nights and long hours of searching the internet and looking at thousands of different rim and tire combinations I got the rims I wanted......now I just have to wait!!! They will be here by next Friday.
I ordered the VOSSEN VVS078 20x9 Machine Black rims wrapped in FALKEN FK-452 255/35/20! These rims have a 2 1/2 chrome lip all around and will give my 09 Max a much more aggressive stance!!! The wheels will come mounted and balanced with lug nuts, wheel locks, hub rings and TPMS all ready to be installed on my vehicle straight out the box all for $2338! I will definitely upload pictures once they are here......now I just have to be paitient!
Once again here they are:
I ordered the VOSSEN VVS078 20x9 Machine Black rims wrapped in FALKEN FK-452 255/35/20! These rims have a 2 1/2 chrome lip all around and will give my 09 Max a much more aggressive stance!!! The wheels will come mounted and balanced with lug nuts, wheel locks, hub rings and TPMS all ready to be installed on my vehicle straight out the box all for $2338! I will definitely upload pictures once they are here......now I just have to be paitient!
Once again here they are:
11-12-2015, 08:29 AM
#2980
Newbie - Just Registered
Join Date: Dec 2011
Location: Toronto GTA
Posts: 6
Are 7th and 6th generation OEM rims compatible?
Any one know if I can use my 2005 6th generation OEM 18 inch rims on my 2009 as winter rims?
I know my 05 don't have sensors so I will need to live with the constant sensor light on.
I would appreciate any advice.
(Also, are the front disk rotors compatible?)
I know my 05 don't have sensors so I will need to live with the constant sensor light on.
I would appreciate any advice.
(Also, are the front disk rotors compatible?)
11-24-2015, 09:09 AM
#2981
Newbie - Just Registered
Join Date: Nov 2015
Posts: 8
Staggered rims
Question guys:
trying to put 19x8.5 and 19x9 staggered rims on my 2010 Nissan Maxima.
Should I go with front 245 40 19 and rear 275 35 19
or 255 35 19
or can I just run 245 40 19 on all of them?
Anyone has a good deal on tpms?
trying to put 19x8.5 and 19x9 staggered rims on my 2010 Nissan Maxima.
Should I go with front 245 40 19 and rear 275 35 19
or 255 35 19
or can I just run 245 40 19 on all of them?
Anyone has a good deal on tpms?
Last edited by Swissbeast1; 11-24-2015 at 09:11 AM.
11-24-2015, 11:58 AM
#2983
Newbie - Just Registered
Join Date: Nov 2015
Posts: 8
The guys took them off his son car, 2008 Infiniti G37S and I guess he didn't know they were staggered. Got them for the low low. So, I guess I'll run 245 40 on all of them. Will still look good.
Thanks for the advice.
Thanks for the advice.
11-25-2015, 05:54 AM
#2984
Junior Member
Join Date: Jul 2010
Posts: 64
Hey guys, im sorry if somebody already went over it but i just skimmed through the whole thread and i dont think i got a clear answer. Im thinking about getting niche form wheels in size 19 x 9.5 all the way around with +35 offset. Im not lowered and i want to still use the conti dws tires i have now size 245/40/19. I just want to know if i'll have any rubbing issues and if my tires will be stretched. I greatly appreciate any help or info.
11-25-2015, 02:43 PM
#2986
Junior Member
Join Date: Jul 2010
Posts: 64
Thank you very much for the help and the quick response. I will be ordering the wheels online. Is there a way to know or anything i can check to make sure they will clear my stock calipers. I just dont wanna have to return them. Thank you again.
12-03-2015, 04:52 AM
#2991
Junior Member
Join Date: Nov 2014
Location: Dallas, TX
Posts: 56
12-03-2015, 09:22 AM
#2992
Thanks. How close was it? I have the akebono a as well, but am trying to find 10" square setups that will fit.
01-05-2016, 05:44 PM
#3000
Get that non related crap out of here.
There is a wonderful search feature that would answer your question.
But, since you want to thread crap, no, it won't work. The wiring is all different.
Swissbeast, it means your offset was wrong.
There is a wonderful search feature that would answer your question.
But, since you want to thread crap, no, it won't work. The wiring is all different.
Swissbeast, it means your offset was wrong.