my car is jumping at stops
08-30-2011, 03:52 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Lake co. Fl
Posts: 72
my car is jumping at stops
i got a 96 auto and when i stop at a light it feels like my motor is jumping.at first it was only at lights and now it does it while i am driving some times.some times it feels like it is gonna stall on me. there are no cel codes either. i was told it was my torque converter and then i was told it could be bad fuel injectors also. i am stumped any input will help, and when i first get in to go anywhere it takes a minute to star the car i have to keep turning the key then letting off then turning it over again i have to do that 2 or 3 times before it will start
08-30-2011, 04:28 PM
#3
i got a 96 auto and when i stop at a light it feels like my motor is jumping.at first it was only at lights and now it does it while i am driving some times.some times it feels like it is gonna stall on me. there are no cel codes either. i was told it was my torque converter and then i was told it could be bad fuel injectors also. i am stumped any input will help, and when i first get in to go anywhere it takes a minute to star the car i have to keep turning the key then letting off then turning it over again i have to do that 2 or 3 times before it will start
08-31-2011, 07:06 PM
#7
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Lake co. Fl
Posts: 72
@ nj max its not a misfire but it does almost feel like one and i have done all my coil packs and plugs but not injectors yet and no cel
@ cashoit where are the crank sensors and if you have what the resistance should be that would help
@ tigersharkdude just have to keep cranking but this morning before i went to work it shut off when i put it in reverse and pressed the gas but that is the first time it has done that
@ cashoit where are the crank sensors and if you have what the resistance should be that would help
@ tigersharkdude just have to keep cranking but this morning before i went to work it shut off when i put it in reverse and pressed the gas but that is the first time it has done that
09-01-2011, 12:35 PM
#8
Senior Member
Join Date: Sep 2009
Location: Worcester, MA
Posts: 4,011
i assume you have already cleaned TB and MAF, replaced PCV and ECTS.
Read my earlier post. A resistacnce test tells u nothing about the crank sensors. Test for the cranks is a voltage test.
The test for the Camshaft postiion sensor is a resistance test
Read my earlier post. A resistacnce test tells u nothing about the crank sensors. Test for the cranks is a voltage test.
The test for the Camshaft postiion sensor is a resistance test
09-01-2011, 08:43 PM
#10
09-02-2011, 05:00 PM
#12
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Lake co. Fl
Posts: 72
so the oil dont mean my camshaft position sensor is bad?and i tried to get the o-ring today but they dont carry it at autozone anyone know where to get it
and @ maxjamin i am throwing no codes it has been scanned multiple times when i first the bought the car i threw a p0731 (1st gear malfunction) but that just went away other than that any codes that have been thrown were fixed so i dont think it is a miss but i might as well try an injector to
and @ maxjamin i am throwing no codes it has been scanned multiple times when i first the bought the car i threw a p0731 (1st gear malfunction) but that just went away other than that any codes that have been thrown were fixed so i dont think it is a miss but i might as well try an injector to
09-04-2011, 02:05 AM
#13
Senior Member
Join Date: Oct 2010
Location: Connecticut
Posts: 421
so the oil dont mean my camshaft position sensor is bad?and i tried to get the o-ring today but they dont carry it at autozone anyone know where to get it
and @ maxjamin i am throwing no codes it has been scanned multiple times when i first the bought the car i threw a p0731 (1st gear malfunction) but that just went away other than that any codes that have been thrown were fixed so i dont think it is a miss but i might as well try an injector to
and @ maxjamin i am throwing no codes it has been scanned multiple times when i first the bought the car i threw a p0731 (1st gear malfunction) but that just went away other than that any codes that have been thrown were fixed so i dont think it is a miss but i might as well try an injector to
well, i would say compression test it, and change the plugs/coils and then maybe the injector, im just gunna live with it untill next year (cars goin under the knife BIG TIME
09-06-2011, 12:20 PM
#14
Senior Member
Join Date: Nov 2010
Location: Powder Springs, GA
Posts: 400
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
kjlouis
4th Generation Maxima (1995-1999)
11
11-24-2018 06:09 AM
kirkhilles
5th Generation Maxima (2000-2003)
2
08-08-2015 10:53 AM
