Car won't stay running
#1
Car won't stay running
1998 Maxima GXE 6 cylinder
When I start the car it runs for a few seconds then spits and sputters and dies. If I give it gas it acts like it only is running and 3 cylinders and quickly dies. I pulled the codes and it shows 75, 71, 41.
One I know is a Evap code. I think the 41 is the egr valve? Would this by symptoms of a bad egr? Would a blown head gasket cause this as my son did run the car hot.
When I start the car it runs for a few seconds then spits and sputters and dies. If I give it gas it acts like it only is running and 3 cylinders and quickly dies. I pulled the codes and it shows 75, 71, 41.
One I know is a Evap code. I think the 41 is the egr valve? Would this by symptoms of a bad egr? Would a blown head gasket cause this as my son did run the car hot.
#3
I one by one disconnected the coils one at a time of course and 5 of them change when unplugged, one of them no change at all. Could one bad coil cause it to run so rough? I am going to change it and put all new plugs in to see what happens. I suspect I still have other problems
#5
#7
I tried the old put a screw driver on top of the injector and it clicks so I am guessing it is working. All the injectors have the sound clicking noise when I do that. It looks like to change the rear injector the manifold has to be removed.
I am going to do a compression check next on that cylinder. I have great spark out of the new coil and new plug. At a loss
I am going to do a compression check next on that cylinder. I have great spark out of the new coil and new plug. At a loss
#9
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
kjlouis
4th Generation Maxima (1995-1999)
11
11-24-2018 06:09 AM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM