327whp N/A
#3
Everything is listed (and for sale) here:
http://forums.maxima.org/general-max...-part-out.html
Cliffnotes:
96mm Wiseco pistons and rods. Coated tops (sent them out to do this) and coated skirts.
Eagle rods
Cranked micro polished, magnafluxed and knife edge!
Calico coated acl bearings and thrust bearings.
Arp main studs
Arp L19 heae studs.
Cometic head gasket. Measured to make sure bore is slightly large as to not cause detonation.
Heads have big cams. The idle is amazing!!!! (Details will be discussed with new owner)*
Ferrea 6000 series valves
Supertech double valve springs
http://forums.maxima.org/general-max...-part-out.html
Cliffnotes:
96mm Wiseco pistons and rods. Coated tops (sent them out to do this) and coated skirts.
Eagle rods
Cranked micro polished, magnafluxed and knife edge!
Calico coated acl bearings and thrust bearings.
Arp main studs
Arp L19 heae studs.
Cometic head gasket. Measured to make sure bore is slightly large as to not cause detonation.
Heads have big cams. The idle is amazing!!!! (Details will be discussed with new owner)*
Ferrea 6000 series valves
Supertech double valve springs
#5
when you say big cams are you talking jwt c9 or bigger? 283 w 13.11mm
c9s have to have the heads cut for clearance.
c8s are 272 w12.01 mm with no head cutting needed.
good uncorrected #'s forsure.
I guess tq was maxed out, i made 271 tq on stock cams hr heads though.
edit: was a DD dyno? that explains it
c9s have to have the heads cut for clearance.
c8s are 272 w12.01 mm with no head cutting needed.
good uncorrected #'s forsure.
I guess tq was maxed out, i made 271 tq on stock cams hr heads though.
edit: was a DD dyno? that explains it
Last edited by SurraTT; 02-28-2014 at 01:39 PM.
#12
Fyi. This was with stock throttle body, maf housing and a injen cai.
Was hoping to upgrade all of that, fix an exhaust leabk and get more aggressive with the tuning. My tuner explained to me how he can easily squeeze another 8-10whp just in the tune.
Was hoping to upgrade all of that, fix an exhaust leabk and get more aggressive with the tuning. My tuner explained to me how he can easily squeeze another 8-10whp just in the tune.
Thread
Thread Starter
Forum
Replies
Last Post
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM