CAN-Toronto Custom Urethane Engine mounts Pass/trans
#41
1. Maxterror (tmec)
2. blkAEmax82 (both sides)
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (both sides copied from other thread)
6. george__
7. 03GLEmaxima (passenger)
8. Yoitsme
9. RebelHell PAID
2. blkAEmax82 (both sides)
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (both sides copied from other thread)
6. george__
7. 03GLEmaxima (passenger)
8. Yoitsme
9. RebelHell PAID
#45
1. Maxterror (tmec) PAID
2. blkAEmax82 (both sides)
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (cancelled)
6. george__
7. 03GLEmaxima (passenger)
8. Yoitsme
9. RebelHell PAID
2. blkAEmax82 (both sides)
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (cancelled)
6. george__
7. 03GLEmaxima (passenger)
8. Yoitsme
9. RebelHell PAID
#49
1. Maxterror (tmec) PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (cancelled)
6. george__
7. 03GLEmaxima (passenger) PAID
8. Yoitsme
9. RebelHell PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (cancelled)
6. george__
7. 03GLEmaxima (passenger) PAID
8. Yoitsme
9. RebelHell PAID
Last edited by knight_yyz; 05-02-2013 at 08:43 AM.
#50
I have pm'd everyone on the list who has not paid. i also went through all my old pm's and contacted all the people who said they wanted a set. Hopefully a few more people will come on board so we can get this order started.
#52
pouring is 2 weeks usually but can take longer if they are busy. We are peanuts in the grand scheme of things, a 1500 dollar order isn't much to them. But they always get it done.
#53
1. Maxterror (tmec) PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (cancelled)
6. george__ PAID
7. 03GLEmaxima (passenger) PAID
8. Yoitsme
9. RebelHell PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec)
4. Regime (Both sides) PAID
5. imported_Nismo_max (cancelled)
6. george__ PAID
7. 03GLEmaxima (passenger) PAID
8. Yoitsme
9. RebelHell PAID
#55
#57
yup I'm ready to place the order on Monday morning. I just got in the house and my contact is gone home early.
send 150 plus 3% for paypal fees to knight_yyz @ cogeco.ca without the spaces. or send it as a gift. I'll pay the exchange rate on this but not the paypal fees.
send 150 plus 3% for paypal fees to knight_yyz @ cogeco.ca without the spaces. or send it as a gift. I'll pay the exchange rate on this but not the paypal fees.
#59
1. Maxterror (tmec) PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec) PAID
4. Regime (Both sides) PAID
5. george__ PAID
6. 03GLEmaxima (passenger) PAID
7. RebelHell PAID
8. risingmist PAID
Ok, I am placing the order on Monday morning. After that it is up to the urethane company to pour the pucks for us. if all goes well this normally takes 2-3 weeks. As soon as these are in I will ship
ASAP
If anyone wants in on the deal over the weekend I need the money in my paypal account by 730am Monday EST. That's what time I get home from midnight shift and place the order.
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec) PAID
4. Regime (Both sides) PAID
5. george__ PAID
6. 03GLEmaxima (passenger) PAID
7. RebelHell PAID
8. risingmist PAID
Ok, I am placing the order on Monday morning. After that it is up to the urethane company to pour the pucks for us. if all goes well this normally takes 2-3 weeks. As soon as these are in I will ship
ASAP
If anyone wants in on the deal over the weekend I need the money in my paypal account by 730am Monday EST. That's what time I get home from midnight shift and place the order.
Last edited by knight_yyz; 05-03-2013 at 05:07 PM.
#63
1. Maxterror (tmec) PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec) PAID
4. Regime (Both sides) PAID
5. george__ PAID
6. 03GLEmaxima (passenger) PAID
7. RebelHell PAID
8. risingmist PAID
9. TurboA32 PAID
2. blkAEmax82 (both sides) PAID
3. yguyfc (tmec) PAID
4. Regime (Both sides) PAID
5. george__ PAID
6. 03GLEmaxima (passenger) PAID
7. RebelHell PAID
8. risingmist PAID
9. TurboA32 PAID
#64
People are pm'ing me and asking when they will be ready. Please read post 59. It answers all your questions. I don't pour the urethane, I designed the prototype and the mold. It's out of my hands until they call me
#65
I know I said it before, but I will say it again, Thank you Knight for all your hard work. Most of us appreciate and understand how much effort you have put into the community. Keep it up, and don't let the people that can't even put the effort into READING the damned thread, get you down.
#66
I know I said it before, but I will say it again, Thank you Knight for all your hard work. Most of us appreciate and understand how much effort you have put into the community. Keep it up, and don't let the people that can't even put the effort into READING the damned thread, get you down.
#67
I know I said it before, but I will say it again, Thank you Knight for all your hard work. Most of us appreciate and understand how much effort you have put into the community. Keep it up, and don't let the people that can't even put the effort into READING the damned thread, get you down.
#68
Hi Guys, I hadn't heard anything from my supplier so I sent off an email yesterday. I got the reply today saying they will be ready soon. Sorry for the delay, everything else is ready to go. The sleeves are ready, I have the shipping boxes ready and the shipping labels are done. Just waiting to pick them up when I get the call
#69
Hi Guys, I hadn't heard anything from my supplier so I sent off an email yesterday. I got the reply today saying they will be ready soon. Sorry for the delay, everything else is ready to go. The sleeves are ready, I have the shipping boxes ready and the shipping labels are done. Just waiting to pick them up when I get the call
#72
I've just been informed that these will be ready for me to pick up after work on Thursday. I will package them up and hopefully ship on Friday or Saturday at the latest. If they are not ready I will post when I get home from work Thursday
#79
I'm pretty sure all the guys who bought these have 4th gens, so please don't forget that the drivers side pucks need the nibs cut off. They can be sanded off or use a good exacto type knife and slice them off or you wont get them on.
Plain pucks passenger side with the longer peg, nibs get cut off and go on drivers side with shorter peg.
You only keep the nibs if you have a 6 speed
Plain pucks passenger side with the longer peg, nibs get cut off and go on drivers side with shorter peg.
You only keep the nibs if you have a 6 speed
#80
I'm pretty sure all the guys who bought these have 4th gens, so please don't forget that the drivers side pucks need the nibs cut off. They can be sanded off or use a good exacto type knife and slice them off or you wont get them on.
Plain pucks passenger side with the longer peg, nibs get cut off and go on drivers side with shorter peg.
You only keep the nibs if you have a 6 speed
Plain pucks passenger side with the longer peg, nibs get cut off and go on drivers side with shorter peg.
You only keep the nibs if you have a 6 speed
I have the install thread bookmarked. Can't wait.