Official '09 Maxus For Sale thread
05-10-2009, 08:10 PM
#1
Official '09 Maxus For Sale thread
Parts that I'd like to sell to those attending Maxus this year. CASH only, no checks please.
EDIT: REMAINING ITEMS
Stillen Aero kit (urethane), painted Super Black - $500
Will take it off my car at the meet if I get a buyer
6000K HID fogs, plug and play, mounted in OEM fog light housings - $175
Hella Supertone Horns, includes relay and 2 grounding wires - $35
Nissan All season floor mats - $20
Car cover - $30
Stock SE suspension w/ 40k miles - $200
Stillen Front strut tower bar $100
Stillen aluminum oil cap - $30 (SOLD to Stillen Maxima)
Frankencar Intake (rare!) - $110 (SOLD to MaximD95)
EDIT: REMAINING ITEMS
Stillen Aero kit (urethane), painted Super Black - $500
Will take it off my car at the meet if I get a buyer
6000K HID fogs, plug and play, mounted in OEM fog light housings - $175
Hella Supertone Horns, includes relay and 2 grounding wires - $35
Nissan All season floor mats - $20
Car cover - $30
Stock SE suspension w/ 40k miles - $200
Stillen Front strut tower bar $100
Stillen aluminum oil cap - $30 (SOLD to Stillen Maxima)
Frankencar Intake (rare!) - $110 (SOLD to MaximD95)
Last edited by 00MaxSE; 06-25-2009 at 05:48 PM.
05-10-2009, 08:11 PM
#2
AE pedals - $30.00 (SOLD to 97SMG)
AE **** - $20.00 (SOLD to tresboi)
AE door sills (Frost color) - $30 (SOLD to 02maxzima)
Trunk mat - $40.00 (SOLD to SurraTT)
Genuine Nismo polished license plate frame - $15.00 (SOLD to MaximD95)
AE **** - $20.00 (SOLD to tresboi)
AE door sills (Frost color) - $30 (SOLD to 02maxzima)
Trunk mat - $40.00 (SOLD to SurraTT)
Genuine Nismo polished license plate frame - $15.00 (SOLD to MaximD95)
Last edited by 00MaxSE; 06-25-2009 at 05:48 PM.
05-27-2009, 06:22 AM
#23
Jime's Garage Sale
This is a start, I will be adding more as I get a little organized.
All come with Original boxes, Manuals/software.
1. Emanage Ultimate with complete harness. $425 Sold
2. Emanage MAP Sensor and Harness. $70
3. SAFCII with mount. $130 Sold
4. Transgo Shift Kit RE4F04A 95-99's. $35 Sold
5. FJO Progressive Nitrous Controller Gen-2. $175
The PROGRESSIVE NITROUS MINI-CONTROLLER combines the functions of our 2-STAGE TPS AND RPM WINDOW SWITCH and our HIGH CURRENT SOLENOID DRIVER all into one very compact module. It can progressively drive two channels, each with a 40 amp load capacity (continuous duty). The device also supports low-voltage OEM, V10 or 3 cylinder TACH signals without the need for additional adapters. It works with most OEM throttle position sensors including most drive-by-wire vehicles. This device also includes FJO's "real curve" ramp which allows you to create a progressive curve instead of just a ramp, and the ramp can be either time based or RPM based. All this and only the size of a spark plug box.
Nothing required for install in all Maxima's, cable or drive by wire.
Check here for more info and manual. http://www.fjoracing.com/products/2s.../downloads.php
6. GTechPro Competition. $80 Original cost $359. Firmware upgraded to RR. Mounting bracket is cracked, replacement is $19.95.
7. Innovate OT-1, OpenTune OBDII/Can Interface. $125 Check here for details. http://www.innovatemotorsports.com/products/ot1.php
8. Innovate LC-1 Wideband Sensor Controller $100. Sensors are approx $50 available from Autozone, VW dealers etc. Sold
All come with Original boxes, Manuals/software.
1. Emanage Ultimate with complete harness. $425 Sold
2. Emanage MAP Sensor and Harness. $70
3. SAFCII with mount. $130 Sold
4. Transgo Shift Kit RE4F04A 95-99's. $35 Sold
5. FJO Progressive Nitrous Controller Gen-2. $175
The PROGRESSIVE NITROUS MINI-CONTROLLER combines the functions of our 2-STAGE TPS AND RPM WINDOW SWITCH and our HIGH CURRENT SOLENOID DRIVER all into one very compact module. It can progressively drive two channels, each with a 40 amp load capacity (continuous duty). The device also supports low-voltage OEM, V10 or 3 cylinder TACH signals without the need for additional adapters. It works with most OEM throttle position sensors including most drive-by-wire vehicles. This device also includes FJO's "real curve" ramp which allows you to create a progressive curve instead of just a ramp, and the ramp can be either time based or RPM based. All this and only the size of a spark plug box.
Nothing required for install in all Maxima's, cable or drive by wire.
Check here for more info and manual. http://www.fjoracing.com/products/2s.../downloads.php
6. GTechPro Competition. $80 Original cost $359. Firmware upgraded to RR. Mounting bracket is cracked, replacement is $19.95.
7. Innovate OT-1, OpenTune OBDII/Can Interface. $125 Check here for details. http://www.innovatemotorsports.com/products/ot1.php
8. Innovate LC-1 Wideband Sensor Controller $100. Sensors are approx $50 available from Autozone, VW dealers etc. Sold
Last edited by Jime; 06-14-2009 at 12:41 PM.
05-27-2009, 12:27 PM
#24
Hill's Garage Specials
Im posting this on behalf of Hill's Garage whom will be on of the sponsors of Maxus this year.
They will be offering an exclusive deal on WP Pro L6 6 Piston brakes.
The price will be $1999 installed. But the needs to be a minimum of 5 people in order for them to be able to offer it at this price. By Maxus you will need at least a $100 deposit to hold your spot on the list.
You can read more about the brake kit at the manufacturer's website www.wpprobrakes.com/L6.htm
If you have been trying to get the bigbrake kit for your car this is the deal that you dont want to miss. Keep in mind that most other big brake kits are only four piston kits and they come to about the same price just for the parts. The is a much better setup and it comes installed at an authorized shop which means that the warranty will be honored. (Yes, I may have forgotten to mention that it comes with a limited lifetime warranty).
Any Questions??? Check out www.wpprobrakes.com or call Hill's Garage @ (410)636-5554
Im posting this on behalf of Hill's Garage whom will be on of the sponsors of Maxus this year.
They will be offering an exclusive deal on WP Pro L6 6 Piston brakes.
The price will be $1999 installed. But the needs to be a minimum of 5 people in order for them to be able to offer it at this price. By Maxus you will need at least a $100 deposit to hold your spot on the list.
You can read more about the brake kit at the manufacturer's website www.wpprobrakes.com/L6.htm
If you have been trying to get the bigbrake kit for your car this is the deal that you dont want to miss. Keep in mind that most other big brake kits are only four piston kits and they come to about the same price just for the parts. The is a much better setup and it comes installed at an authorized shop which means that the warranty will be honored. (Yes, I may have forgotten to mention that it comes with a limited lifetime warranty).
Any Questions??? Check out www.wpprobrakes.com or call Hill's Garage @ (410)636-5554
05-28-2009, 11:34 AM
#25
Senior Member
Join Date: Apr 2008
Location: Baltimore, MD
Posts: 147
hey ill take that intake and the Nismo license plade frame
06-06-2009, 03:19 PM
#30
I am planning on being at Maxus, and will have some spare tire covers with me. Please PM me if you'd like to get one at the event so I know how many to bring. All details about them can be found in the link in my sig. Thanks!
06-08-2009, 12:24 PM
#33
I will add pictures and more parts to this post later. Most of the items I am selling will require a paypal deposit unless I know you, because I am not bringing these things unless I know they are sold.
1995-1999
K-Sport Coil overs for a Fourth Gen. One of the dampners is blown but I have a brand new one from K-Sport. I will sell these for $400.
1995-1999
Full fiberglass R33 Skyline Body kit painted viper blue. Its in good over all shape. The paint is good but there is one spot on the bottom of the front bumper that will need to be repaired or you can just deal with a crack. $300
1995-1996
I have a custom 2.5" exhaust that is a Y pipe back set up. It will come with a catco high flow cat with flanges. It has a SS polished Magnaflow Resinator, and a SS polished Magnaflow muffler with a SS polished Magnaflow tip. I cut it where it goes over the rear axle, so you will need to have it welded at that point. $250
A pair of two 5zigen fno1r-c 17x9 with a +43 offset. These wheels were sold to me by a former member on here. He lied about the size and the tread on the tires. The specs I have post are correct and the wheels have two worn out 275 drag radials. The wheels look new. $200
1995-1999
Two fourth gen strut bars. The blue one was made by custom maxima, most of the blue coating is faded, it is in fine functional shape, but could use some paint. The second one is a Otto racing bar, that is polished. Not the prettiest thing but it is what it is. $10 for either one.
Please PM me if you are interested in anything. Thanks.
1995-1999
K-Sport Coil overs for a Fourth Gen. One of the dampners is blown but I have a brand new one from K-Sport. I will sell these for $400.
1995-1999
Full fiberglass R33 Skyline Body kit painted viper blue. Its in good over all shape. The paint is good but there is one spot on the bottom of the front bumper that will need to be repaired or you can just deal with a crack. $300
1995-1996
I have a custom 2.5" exhaust that is a Y pipe back set up. It will come with a catco high flow cat with flanges. It has a SS polished Magnaflow Resinator, and a SS polished Magnaflow muffler with a SS polished Magnaflow tip. I cut it where it goes over the rear axle, so you will need to have it welded at that point. $250
A pair of two 5zigen fno1r-c 17x9 with a +43 offset. These wheels were sold to me by a former member on here. He lied about the size and the tread on the tires. The specs I have post are correct and the wheels have two worn out 275 drag radials. The wheels look new. $200
1995-1999
Two fourth gen strut bars. The blue one was made by custom maxima, most of the blue coating is faded, it is in fine functional shape, but could use some paint. The second one is a Otto racing bar, that is polished. Not the prettiest thing but it is what it is. $10 for either one.
Please PM me if you are interested in anything. Thanks.
06-08-2009, 12:26 PM
#34
few exhaust pics
I have a Serona Designs Mesh front grille painted bright blue for a fourth gen $50
I also have a fourth gen black leather seat back in great shape and the seams are not pulled apart. If anyone is interested let me know and I can take a picture. $70
The Axis Hiro's in the pictures above are also for sale. 19x8.5" +35 w/ Nitto 555 Extreme tires 235/35/19. Great condition $1300
I also have a 4th gen rear sway bar. I think it was made by progress. It will come with the hardware and bushings. $70
I have a set of 2 16x7.5" Z32 300zx wheels, in good shape with center caps. $100
I am also open to trades if you have anything good PM me an offer.
I have a Serona Designs Mesh front grille painted bright blue for a fourth gen $50
I also have a fourth gen black leather seat back in great shape and the seams are not pulled apart. If anyone is interested let me know and I can take a picture. $70
The Axis Hiro's in the pictures above are also for sale. 19x8.5" +35 w/ Nitto 555 Extreme tires 235/35/19. Great condition $1300
I also have a 4th gen rear sway bar. I think it was made by progress. It will come with the hardware and bushings. $70
I have a set of 2 16x7.5" Z32 300zx wheels, in good shape with center caps. $100
I am also open to trades if you have anything good PM me an offer.
Last edited by cardana24; 06-22-2009 at 12:15 PM.
06-09-2009, 07:45 AM
#36
I will have a brand new un opened exedy stage 1 for sale asking $250, and i will bring to maxus
and i have a stillen muffler that is still on my car, if i get my 2k1 muffler put on in time i will have that for sale also for $175 and ill bring it to maxus, let me know if anyone is interested
and i have a stillen muffler that is still on my car, if i get my 2k1 muffler put on in time i will have that for sale also for $175 and ill bring it to maxus, let me know if anyone is interested
06-13-2009, 03:45 PM
#37
I have started my own For Sale thread due to the large amount of items I have for sale along with pics. To see all items listed with pics, please visit:
http://forums.maxima.org/maxus/59243...axus-09-a.html
Here is what I have for sale:
Aftermarket and Performance Parts:
1) 5.5g Cluster, ECU & NATS w/key & ignition, Steering Wheel, Steering Column, egas pedal assembly with APP Sensor $400 firm
Everything came from the SAME car! This is very tough to find. The Immobilizer, Ignition, Key, and ECM all match up perfectly. Came out of a 2002 Nissan Maxima Automatic with 96K miles
2) Turbo XS UTEC (tested in 6th gen Maxima) $500 firm
3) Warpspeed Performance 2.5" Aluminized VE30DE Ypipe w/ wideband bung! $100
4) PLX M300 wideband system w/ display $120
5) ASP UDP w/o AC rib for VE $60
6) Polyfilled VE LH engine mount and almost new RH engine mount $50 for both
7) Ported stock VE exhaust manifolds $50
8) Nismo 150 degree Tstat for VE $40 ($60 new)
9) AshSPEC VE Auto ECU w/ socketed daughterboard $100
10) Z32 300zx VG30DE(TT) MAF in flawless condition $80
11) Flowmaster Exhaust Y-Collector BRAND NEW (Y200250A) $20.00
OEM and spare parts:
1) VE Auto ECU $40ea (two available)
2) VE Auto Transmission Control Module Name your price and it's yours!
3) VE30DE Coil Packs in great shape $60
4) VE30DE Coil Packs in working condition. LH three has a crack on them. $40
5) VE30DE Crank Angle Sensor (tested) $20ea (two available)
6) VE30DE Power Transistor Unit (tested) $20ea (two available)
7) VE MAF w/ screen $40 (tested)
8) VE MAF w/o screen $30 (tested)
9) 02 Maxima Exhaust Manifolds Name your price and it's yours!
10) 02-03 Maxima VIAS actuator assemblies (have two of them) Name your price and it's yours!
11) 03 Altima 3.5L Front Engine Mount $20
12) VE30DE 92 Maxima Remanufactured Starter $30 (top right in pic)
13) VE30DE 92 Maxima OEM Starter 203K miles tested $20 (top left in pic)
14) 02 Maxima OEM Starter tested $30 (bottom in pic)
15) VE30DE/VQ30DE Fuel Injectors w/ rail (Orings and Pintle caps have been replaced. Injectors can be used on VQ30DE 4th gen Maxima) $70
16) 02 Maxima VQ35DE Oil Pump 49K miles $20
17) 02 Maxima VQ35DE Camshafts 49K miles $60
18) 03 Altima 3.5L OEM Power Steering Pump Almost New! (< 10K miles on it) $20
19) VE30DE Remanufactured Alternator in great condition $60
Other items not pictured:
1) 4th gen UIM, LIM, and TB Name your price!
2) VE Auto UIM (have two of them) Name your price!
3) VG30E Maxima UIM w/ lower plate, TB, and Dual Duct Name your price!
http://forums.maxima.org/maxus/59243...axus-09-a.html
Here is what I have for sale:
Aftermarket and Performance Parts:
1) 5.5g Cluster, ECU & NATS w/key & ignition, Steering Wheel, Steering Column, egas pedal assembly with APP Sensor $400 firm
Everything came from the SAME car! This is very tough to find. The Immobilizer, Ignition, Key, and ECM all match up perfectly. Came out of a 2002 Nissan Maxima Automatic with 96K miles
2) Turbo XS UTEC (tested in 6th gen Maxima) $500 firm
3) Warpspeed Performance 2.5" Aluminized VE30DE Ypipe w/ wideband bung! $100
4) PLX M300 wideband system w/ display $120
5) ASP UDP w/o AC rib for VE $60
6) Polyfilled VE LH engine mount and almost new RH engine mount $50 for both
7) Ported stock VE exhaust manifolds $50
8) Nismo 150 degree Tstat for VE $40 ($60 new)
9) AshSPEC VE Auto ECU w/ socketed daughterboard $100
10) Z32 300zx VG30DE(TT) MAF in flawless condition $80
11) Flowmaster Exhaust Y-Collector BRAND NEW (Y200250A) $20.00
OEM and spare parts:
1) VE Auto ECU $40ea (two available)
2) VE Auto Transmission Control Module Name your price and it's yours!
3) VE30DE Coil Packs in great shape $60
4) VE30DE Coil Packs in working condition. LH three has a crack on them. $40
5) VE30DE Crank Angle Sensor (tested) $20ea (two available)
6) VE30DE Power Transistor Unit (tested) $20ea (two available)
7) VE MAF w/ screen $40 (tested)
8) VE MAF w/o screen $30 (tested)
9) 02 Maxima Exhaust Manifolds Name your price and it's yours!
10) 02-03 Maxima VIAS actuator assemblies (have two of them) Name your price and it's yours!
11) 03 Altima 3.5L Front Engine Mount $20
12) VE30DE 92 Maxima Remanufactured Starter $30 (top right in pic)
13) VE30DE 92 Maxima OEM Starter 203K miles tested $20 (top left in pic)
14) 02 Maxima OEM Starter tested $30 (bottom in pic)
15) VE30DE/VQ30DE Fuel Injectors w/ rail (Orings and Pintle caps have been replaced. Injectors can be used on VQ30DE 4th gen Maxima) $70
16) 02 Maxima VQ35DE Oil Pump 49K miles $20
17) 02 Maxima VQ35DE Camshafts 49K miles $60
18) 03 Altima 3.5L OEM Power Steering Pump Almost New! (< 10K miles on it) $20
19) VE30DE Remanufactured Alternator in great condition $60
Other items not pictured:
1) 4th gen UIM, LIM, and TB Name your price!
2) VE Auto UIM (have two of them) Name your price!
3) VG30E Maxima UIM w/ lower plate, TB, and Dual Duct Name your price!
06-15-2009, 07:39 AM
#38
Some more stuff from Jime's Garage Sale
Set of 3.5 Heads. From 2002 Maxima with 35k. $100
Maxspeed springs from 4th Gen, 1.6" drop, used 3 months. $50
2002 Maxima SSIM with Lexan Cover. $100
Maxspeed springs from 4th Gen, 1.6" drop, used 3 months. $50
2002 Maxima SSIM with Lexan Cover. $100
Last edited by Jime; 07-10-2009 at 03:28 AM.
06-15-2009, 07:42 AM
#39
More of Jime's Stuff
2002 3.5 Lower Intake Manifold Original. $35
2002 3.5 Cams Original $75
2002 3.5 Inner and Outer Timing Covers $75
2002 3.5 Automatic Flex Plate. $20
1995 3.0 Automatic Flex Plate. $10
2002 3.5 Cams Original $75
2002 3.5 Inner and Outer Timing Covers $75
2002 3.5 Automatic Flex Plate. $20
1995 3.0 Automatic Flex Plate. $10
Last edited by Jime; 06-15-2009 at 07:45 AM.
