Turbo VQ30??? :) :D
#1
Turbo VQ30??? :) :D
Looking into building a Vq30 engine for boost. Curious to see who else did. It and what kind of turbo setups you have, what kind of internals, the whole 9 yards. Please let me know. Very interested...
#4
#5
Turbonetics t3/t04s (4" inlet) 60-1 .63ar, old school tial 40mm wastegate with 9psi spring, hallman pro boost controller, HKS ssqv bov, MEVI with the actuator ziptied open, greddy intercooler, all 3" intercooler piping, 2.5" stainless downpipe, took my warpspeed y-pipe and put a 180 bend on it to make a forward feedpipe to the turbo. Walbro 255 pump, 370cc injectors from z32 TT, z32 maf, SARD adjustable FPR, running innovate lc-1 wideband, JWT ecu with turbo tune and SAFC2 to keep the A/F in check (I'm too cheap for nistune lol). Installed the kit on my car @ 170k (engine had great compression and was babied it's whole life up until this point), been running 10psi daily and I saw 347whp on the dyno. The only dyno sheet I can find for any proof of power is when I had boost leak from my old greddy type s knockoff bov causing boost to drop to 6-7psi and rich conditions, and I hit 282whp.
I have some pictures uploaded to an album in my profile. I was going to do a build thread here, but I literally installed everything on a weekend I had off work, and didn't really have the time I wanted to spend on a proper build thread.
I have another vq30 on a stand that I am slowly tearing down and going to build for over 400whp. I plan to keep it simple by using using vq30det pistons and misc vq35 parts.
Last edited by hvyft; 06-13-2017 at 02:32 PM. Reason: Forgot some info
#11
#15
Thread
Thread Starter
Forum
Replies
Last Post
MaximaMan
General Maxima Discussion
5
07-27-2002 04:56 PM