![]() |
WTF still no 13's
So I went to the track tonight to test out my new mods: 2.5" exhaust, regapped plugs, mazda wheels, walbro fuel pump and afpr
everything was going well I spun alittle but no biggy till my afpr took a crap :vqman: during the run, I still ran a 14.0 but WTF. I was checking my vac line cause the car was idling crazy and would not hold a steady rpm when I pulled the vac line from the afpr gas starting coming out so I rigged it up to get home and I will return the afpr in the morining here's how I ran spinning off the line and with a bad afpr, one good thing my mph went up almost 3mph from my last run 60ft: 2.1 330: 5.8 1/8: 8.9 mph: 77.5 1000: 11.7 1/4: 14.0 mph: 95.98 |
Your mph is alittle low, I was hitting 14.4 at 95mph with 50 shot and 2.2 60'. Only mods was intake and ypipe with 2 step colder plugs.
|
Originally Posted by SonicDust187
Your mph is alittle low, I was hitting 14.4 at 95mph with 50 shot and 2.2 60'. Only mods was intake and ypipe with 2 step colder plugs.
|
Don't worry tom you'll get there. I agree though I still don't understand why your mph is so low?? Even when you did the 14.3 your were trapping at 93.At 14.0 you should be trapping at least 98mph. I really think you need a tune.
|
Originally Posted by babymac
Don't worry tom you'll get there. I agree though I still don't understand why your mph is so low?? Even when you did the 14.3 your were trapping at 93.At 14.0 you should be trapping at least 98mph. I really think you need a tune.
also I return the afpr this morning |
Did you have any problems returning the afpr? And did you get a new one?
|
Originally Posted by babymac
Did you have any problems returning the afpr? And did you get a new one?
|
Originally Posted by LA02MAX
did you read his post? :scratch:
|
Tom are still running your stock muffler?
|
Originally Posted by SonicDust187
Trust me I read. Still donesn't change the fact at even when he was 3mph slower from last 1/4 run, he was still running way to slow on the top end.
Originally Posted by t6378tp
everything was going well I spun alittle but no biggy till my afpr took a crap
|
Originally Posted by LA02MAX
Read that again. His afpr went out mid way through the run, which explains why the car wasn't running right all the way through. He would have been in the 13s if it weren't for that.
|
Originally Posted by SonicDust187
What you are not getting is that with his previous setup on 75 shot he was only trapping 92mph when he should have been trapping 97.5+. That in itself whats wrong.
|
Originally Posted by LA02MAX
How was I supposed to know that, exactly? :scratch:
|
Originally Posted by SonicDust187
Don't know, thats your problem.
__________ |
Originally Posted by SonicDust187
What you are not getting is that with his previous setup on 75 shot he was only trapping 92mph when he should have been trapping 97.5+. That in itself whats wrong.
|
When I was running an 80 shot of nitrous on my 4th gen, I was running 13.7@100. I was averaging 1.95 60 ft's on slicks, spinning. My 1/8 was around 8.7, and around 82-83mph. I was running similar mods to yours, except I had a mobiltek stage 2 valvebody. I think you are on the cusp of reaching the elusive 13.9X. What RPM are you launching at?
|
Originally Posted by TAPOUT
When I was running an 80 shot of nitrous on my 4th gen, I was running 13.7@100. I was averaging 1.95 60 ft's on slicks, spinning. My 1/8 was around 8.7, and around 82-83mph. I was running similar mods to yours, except I had a mobiltek stage 2 valvebody. I think you are on the cusp of reaching the elusive 13.9X. What RPM are you launching at?
|
Originally Posted by babymac
Tom are still running your stock muffler?
|
Originally Posted by SonicDust187
What you are not getting is that with his previous setup on 75 shot he was only trapping 92mph when he should have been trapping 97.5+. That in itself whats wrong.
|
Originally Posted by t6378tp
no, y-pipe, high flow cat, 2.5" b-pipe and flow master muffler
|
Originally Posted by TAPOUT
When I was running an 80 shot of nitrous on my 4th gen, I was running 13.7@100. I was averaging 1.95 60 ft's on slicks, spinning. My 1/8 was around 8.7, and around 82-83mph. I was running similar mods to yours, except I had a mobiltek stage 2 valvebody. I think you are on the cusp of reaching the elusive 13.9X. What RPM are you launching at?
I pull 2.0 to 2.1-60fts with the stock 205/65/15's @ 15psi but the tires are max'd out and I can not launch any harder without blowing the tires off the rim I lauch from idle, I find this to work the best cause if I try launching at a higher rpm the tires will just spin I am not really worried about it cause if the afpr did not die on the run I would have broke 13's |
yeah this may clear somethings up I ran a 8.95 in the 1/8 and the 1/8-1/4 convertor it says I would have ran a 13.96
|
thats good bro. keep it up
|
Sux I haven't hit 13.9s yet and my mph is 101-102 with 2.2 '60 foot on drag radials :shiner:
|
Originally Posted by smotz
Sux I haven't hit 13.9s yet and my mph is 101-102 with 2.2 '60 foot on drag radials :shiner:
|
75 wet nx ***
|
Originally Posted by t6378tp
yeah this may clear somethings up I ran a 8.95 in the 1/8 and the 1/8-1/4 convertor it says I would have ran a 13.96
|
get some headers...
|
Originally Posted by Torgus
get some headers...
|
So are u consistently running 13's yet?
|
yep 13.9's all day read ther post
I have a few problems to fix but once they are gone I am looking at 13.6 to 13.7's |
| All times are GMT -7. The time now is 10:11 PM. |
© 2026 MH Sub I, LLC dba Internet Brands