NISformance 2002 Maxima 12.79 @ 110
#1
NISformance 2002 Maxima 12.79 @ 110
60ft- 2.04
1/8- 8.32
1/8- 87.89mph
1/4- 12.79
1/4- 110.46
Second trip to the track with Anthonys NISformance Maxima
This time we launched at a higher rpm , hoping the stock clutch held on long enough to get a good pass in! Best pass of 12.79 at 110!
Thats with 18" Altima SER wheels with Nitto nt01 tires
Car info:
2002 Maxima
NISformance high power long 3.5" intake
2010 Maxima intake manifold with working vias
2008 Altima VQ35DE
ARP rod bolts
High volume oil pump
ebay headers
3" straight pipe exhaust
4.1 FD with HLSD
NISformance reflash dyno tune
The car dynos at 294 WHP 265 TQ
seats and spare tire removed for track
A very simple setup can perform well on the track, it just takes the right combination of mods , tune, tires, and driver.
1/8- 8.32
1/8- 87.89mph
1/4- 12.79
1/4- 110.46
Second trip to the track with Anthonys NISformance Maxima
This time we launched at a higher rpm , hoping the stock clutch held on long enough to get a good pass in! Best pass of 12.79 at 110!
Thats with 18" Altima SER wheels with Nitto nt01 tires
Car info:
2002 Maxima
NISformance high power long 3.5" intake
2010 Maxima intake manifold with working vias
2008 Altima VQ35DE
ARP rod bolts
High volume oil pump
ebay headers
3" straight pipe exhaust
4.1 FD with HLSD
NISformance reflash dyno tune
The car dynos at 294 WHP 265 TQ
seats and spare tire removed for track
A very simple setup can perform well on the track, it just takes the right combination of mods , tune, tires, and driver.
#2
hello. very nice numbers.
I am trying to get to this numbers and I have bought a 2014 maxima engine to swap it into my 2001 middle east maxima (it looks like infiniti i30 but with nissan badges)
Do you know the exact weight of the car?
Is it 6 speed gearbox with 4.1 FD or 5 speed? Do you know the gear ratios?
Going past what rpm requires the high volume oil pump is it safe up to 7500 rpms? What's your rev limit?
What RPM is your peak TQ at?
I am guessing you are using haltech standalone ECU like you always have, right?
I have been searching and reading the forum for the past couple of month and it seems your the pioneer for HR swap and I should follow closely in your footsteps.
Any help would be appreciated very much.
P.S: My goal is to beat 3.8 hyundai genesis coupe but looks like its not doable with VQ30DE-K
I am trying to get to this numbers and I have bought a 2014 maxima engine to swap it into my 2001 middle east maxima (it looks like infiniti i30 but with nissan badges)
Do you know the exact weight of the car?
Is it 6 speed gearbox with 4.1 FD or 5 speed? Do you know the gear ratios?
Going past what rpm requires the high volume oil pump is it safe up to 7500 rpms? What's your rev limit?
What RPM is your peak TQ at?
I am guessing you are using haltech standalone ECU like you always have, right?
I have been searching and reading the forum for the past couple of month and it seems your the pioneer for HR swap and I should follow closely in your footsteps.
Any help would be appreciated very much.
P.S: My goal is to beat 3.8 hyundai genesis coupe but looks like its not doable with VQ30DE-K
Thread
Thread Starter
Forum
Replies
Last Post
Tbonephile
5th Generation Maxima (2000-2003)
9
06-10-2002 03:43 PM
Paul6speed
General Maxima Discussion
82
10-18-2001 07:03 PM
Dave B
General Maxima Discussion
23
10-08-2001 09:41 PM