Fuel pump access
Does anyone done fuel pump replacement because mine just quit at 169k miles and got a whole new assembly unit. Question is how do you access to the fuel pump because I have the factory manual and does not say or show access to rear seat or drop the tank. Can anyone shed light on this? Mine is a 87 Maxima SE and google is useless hoping to find more info before I tackle this job |
i know 3rd gens you just pull the bottom rear seat cushion and its accessible from under the seat cushion, near certain 2nd gen would be the exact same
|
https://m.ebay.com/itm/OEM-Fuel-Pump...64548763?txnId Here’s the OEM pump I bought. You have to remove the whole back seat. Once you take it out there’s 4 screws to the top of the fuel pump and also a gas line held by a clamp. I had to remove the fuel tank due to the inside being rusted. https://cimg9.ibsrv.net/gimg/maxima....5d64fa2d3.jpeg https://cimg7.ibsrv.net/gimg/maxima....ab67e9efd.jpeg Here’s a comparison of a rusted one and one with salt deposits. |
oh wow, that is pretty bad, thanks for the clarity and the pics it really help. I am ready to tackle it, however I know there's a tank seal is that seal on the outside of the tank or the big O ring is under the pump module?
|
as far as i know there should only be a O-ring where the top of the pump meets the tank to prevent vapors from coming out
|
You can reuse it forever unless you screw it up! then you can probably find a 2nd or 3rd gen oring....
|
All times are GMT -7. The time now is 03:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands