2nd Gen Maxima Headers?
#1
2nd Gen Maxima Headers?
Hey! I am wanting to put on headers, but the link on the stickied posts doesnt work, and hasnt worked for awhile. Does anyone know where I can get some new or used? Its for the 1988 year if that matters at all.
#2
i would imagine 3rd gen ones would be the same as 2nd gen. only ones if at all around still would likely be from the brand PaceSetter and theyre notorious for fitment issues. for exhaust stuff on my VG i ended up going WarpSpeed Y pipe to the mandrel exhaust we had as a group buy around 10 years ago with aftermarket muffler/resonator, thats around the best combo for exhaust work. headers i dont even know if you can find anymore
#3
I used the Pacesetter which has been copied by OBX in SS form...I welded between the 2 merge pipes threw all the springs in the trash installed to Vibrant Flex couplings to do the flexing not the ball-n-socket flanges. Once the proper position was obtained, I tightened the new SS hardware at both fwd and aft ball-n-socket flanges and the exhaust worked perfectly with a minor rubbing in reverse only and that was solved wrapping the rack and pinion assy with exhaust wrap....
Last edited by CMax03; 04-08-2019 at 09:42 PM.
#4
I used the Pacesetter which has been copied by OBX in SS form...I welded between the 2 merge pipes threw all the springs in the trash installed to Vibrant Flex couplings to do the flexing not the ball-n-socket flanges. Once the proper position was obtained, I tightened the new SS hardware at both fwd and aft ball-n-socket flanges and the exhaust worked perfectly with a minor rubbing in reverse only and that was solved wrapping the rack and pinion assy with exhaust wrap....
#5
I did grind it down as much as possible and wrap the Rack and Pinion! I have a friend with a super clean 87 Maxima with a 5 spd M/T, cylinder heads have bent valves and this car is the cleanest I've seen he's parting ways with for $500....
#6
Where at and are you getting it?
#7
He wants to save for me but I have enough projects under construction and barely time to do them! I want him to buy a couple of heads for Rock Auto or ebay and I'll install them! But he stated that he's burnt through alot cash and he just wants to part ways! I'm seriously thinking about putting up in a storage unit and do the work on it in the unit away from my home. So my Honey Bunny doesn't complain! I'll try to post some pics ASAP it's a beauty!
#8
He wants to save for me but I have enough projects under construction and barely time to do them! I want him to buy a couple of heads for Rock Auto or ebay and I'll install them! But he stated that he's burnt through alot cash and he just wants to part ways! I'm seriously thinking about putting up in a storage unit and do the work on it in the unit away from my home. So my Honey Bunny doesn't complain! I'll try to post some pics ASAP it's a beauty!
#9
I think he has foglights that are similar to the orginal and a new Sunroof gasket, but not installed...I'll try to get some pics of this 2nd Gen (It's really Nice)...
Last edited by CMax03; 09-02-2019 at 09:13 PM.
#16
Me and another buddy are more than likely gonna buy this, and put it in storage and either build another VG30E or place a used VG30E in it from a Z31....It's a 5 spd tranny and I installed it years ago. the owner decided to change his timing belt. I told to call me to assist him cause I knew he had no clue what he was doing. long story short he bent up all the valves....and has had the car in the garage on jack stands for well over 10 years.
#18
Thread
Thread Starter
Forum
Replies
Last Post
Mayo79
4th Generation Maxima (1995-1999)
9
06-14-2013 04:33 PM