When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
As the title states I'm trying to get a good list of any parts anyone may need before I part out. I'm currently looking for another 3rd gen but if I don't have any luck I'm going to have to part out. Spoiler, phenolic throttle body spacers, JWT pop charger, custom maxima battery tie down, thrush muffler, Otto racing strut tower bar, general strut tower bar ( no emblem), polished upper intake manifold, 2 ecu's and tcu's, many headlights, tail lights, window switches, power heated mirrors, power folding heated mirrors with switch, 2 altenators, starter, maf sensors, distributor, ngk wires (like new) fuel rails for oval top and square top, oval top rail with all fairly new reman jecs injectors. All just to name a few. I'm sure there's many more that will come to mind eventually.. if I don't find another 3rd gen to put my parts on soon everything listed and more will be up for sale. Anyone interested pm me what you need and and I'll let you know if I have it. If I part out I'll only have a limited time before the car gets taken away for scrap. Also have a new in the box oem cat from a 300zx but will bolt up to 3rd gen exhaust. I will post the part number later but this cat goes for over $900 from Nissan. Also have an oil pan for the vg new in the box with used but in good condition oil pickup tube with new gasket and o ring. Rad and fan assembly, chrome gauge rings for cluster or with cluster. Lots of good parts here guys. carr
Also have a stock air intake with K&N filter 50 plus shipping or 70 with maf..
Nope.. all are bolt on parts. I may just need to check the filter on the pop charger because i think it got a little kinked mesh wise but I believe it was still useable and I know the velocity stack on it is good. I believe the headers are good too but I'll have to have my friend take a closer look. The headers were just a year old. Wires are good practically new and window switches are good. I actually put in a stock jdm switch for my mirrors and converted to power folding mirrors. The switch for the mirrors looks the same as your typical switch but with the folding button where the blank is on the right side of the ****. Which switches do you need for the Windows? All 4 doors?
Does your 3rd gen have a manual transmission? I've been toying around with the idea of doing the auto to manual conversion, but I'm not sure how feasible it would be to ship something that large.
Still definitely interested in the windows switches and spark plug wires. The headers sound interesting, but I'm not sure if I am ready to dive back in as deep as I would need to go in order to swap in a new set of headers.
Does your 3rd gen have a manual transmission? I've been toying around with the idea of doing the auto to manual conversion, but I'm not sure how feasible it would be to ship something that large.
Still definitely interested in the windows switches and spark plug wires. The headers sound interesting, but I'm not sure if I am ready to dive back in as deep as I would need to go in order to swap in a new set of headers.
The tranny is actually an auto it's RE4F02A the tranny hadn't died on me but I wanted to refresh it so I just had it rebuilt last summer and probably has less than 1000km on it. I had it rebuilt with new valve body with a transgo shift kit in it. Shifts amazing. New valve body, friction plates etc. Was torn down and fully rebuilt by a reputable tranny shop in my area. The rebuild actually cost me 2000 but worth it and would have been more worth it had I got to enjoy it for more years to come I'd be willing to work out a good deal but you would probably need to arrange shipping. The headers were a pretty nice addition too for an n/a car and comes with the ypipe section too. I could probably even throw in the NTK o2 sensor too for very little extra which costed me 100 and was just replaced last summer before my last etest.
As the title states this is a new in the box cat for 300zx z31 but will bolt up on a 3rd gen. I had planned on using it when my magna flow high flow cat burned out but never did install it. This cat goes for just over $1,000 from Nissan. Part # 20802-06P25 if you'd like to check it out. I will be asking $350 plus shipping with the original box it came in. For serious buyers.
Heated and power folding mirrors with very rare switch for 3rd gen
For sale is a set of power folding heated mirrors. They originally were 180sx mirrors from Japan that were fitted into 3rd gen casings. Also comes with extremely rare hard to find window switch. This switch is exactly like your stock switch but has the folding button where the blank is on the right side of the ****. This switch is extremely hard to find and wasn't the switch that came with the 180sx mirrors. Asking 130 obo plus shipping for the pair with switch and pigtails on the mirrors.
Mirror casings are currently silver but ofcoarse you can paint them any color you like.
SOLD!!
Now parting with lots of good parts. Some rare, some performance aswell as oem and aftermarket. Anyone interested pm me what you need and I'll let you know if I have it.
I have a stillen FSTB in excellent condition on the bar itself but the mounting rings are slightly bent but could easily be straightened out. 80 + shipping. I also have an Otto racing strut tower bar in good condition which I believe will fit over the ve engine too. 90+ shipping for the Otto racing FSTB. Pm me if interested. Please note the Otto racing bar is the exact bar I have but not an actual pic of mine.
Complete stillen body kit. This kit is used but as we know they're made of polyurethane and not cheap fiberglass so they are not prone to cracking etc. I bought this kit new and goes for over 600 on sale on Stillens website. It is painted silver but you will need to clean it up/ sand and repaint if you choose to do so. The side skirts do have some screw holes at the top from where it was screwed into the rockers but easily filled or used again when mounting. Asking $280usd obo + shipping in as is condition ( just removed from car) if interested pm me for shipping cost. Kit will be sold as a whole and not separated. In the pic is the side skirts but front and rear are also included. It is a complete kit
Last edited by ac max 92; 10-17-2017 at 05:57 AM.
Reason: SOLD item
HI DanNY, The mats are black. The gentleman I originally got the from was a firefighter who sold his 3rd gen a long time ago. He told me he got them from the dealer but they are different from the typical embroidered ones. They are all black but the drivers side says maxima under lined in the bottom left corner in a grey coloured carpet. They may not appeal to everyone but I thought they were kind of unique and I was always hesitant to put them in and get them dirty being new and clean lol. If you'd like to give me your email I can send you a pic.
FS fully illuminated working clock and digital climate control
If you have a flickering or dim clock or climate control unit and looking for a working clock or climate control unit I happen to have one for sale and clock will be sold complete with the cluster trim 60+ shipping. Also up for sale I have a fully illuminated digital climate control 70+ shipping or 120 + shipping for both. Both are in excellent shape. Pm if interested. SOLD!!
Last edited by ac max 92; 09-02-2018 at 07:21 AM.
Reason: SOLD item
New in the box Chrome Maxima LED door sills. SOLD!!
As the title states these are a set of 4 new in the box chrome LED door sills. The Maxima lettering is blue LED. I have posted them in the 5th gen section being they fit the 5th gen but I had plans of doing a little mcGyvering to install them on my 3rd gen. With a little customizing they would look nice. I had planned to take the old oem ones out and put some weather stripping and the chrome door sills and wire them into my door switches. As I don't have my 3rd gen any longer I thought maybe another member may be interested in taking on this fairly easy project. I'm asking 100 + shipping. Pm me for a shipping quote if interested and also check out more goodies I have for the 3rd gen listed here in the classifieds. Thanks. SOLD!!
Rare cast model 3rd gen in the original box
for sale 30 + shipping. I have 2 but have been on the fence about letting the silver one go as that was the color of my 3rd gen but the burgundy one is for sale for now.
80 plus shipping. This crank pulley was from a ve. I don't recall the stock ve crank pulley size but I believe this may be a udp . A little dirty in the pic but can clean before shipping.
I'm trying to recall but I can check for you. I think it's jwc or something like that. The spoiler is in good shape. You could always just prime and paint it if you wanted to buy it. Here's a pic of it on my car. It's not the best pic but the only one I have of it on the car now but you get the just of it I'm sure. It fits all 3rd gens 89-94.
Man, that's sweet. The OEM one is made out of this cheap foam and mine has disintegrated with time. I don't know too much about painting, but I may be able to have someone else paint it. I could always paint it black. It would still look OK. Hmm...
Man, you're 3rd gen was so pretty! Is that the original paint job, or did you have it repainted? You never see them this nice.
Man, that's sweet. The OEM one is made out of this cheap foam and mine has disintegrated with time. I don't know too much about painting, but I may be able to have someone else paint it. I could always paint it black. It would still look OK. Hmm...
Man, you're 3rd gen was so pretty! Is that the original paint job, or did you have it repainted? You never see them this nice.
I had it painted. I had alot invested in the car over the many years of ownership and didn't cheap out on any of my parts. I can assure you that spoiler is no cheap foam lol.
If you don't mind sharing, what did it cost to have the car painted? I need to have my 3rd gen repainted sometime, but I have no idea what to expect. I have been toying with the idea of repainting the car black because it would be cheaper and black would look good (I imagine).
I had it done when I had the stillen body kit installed. If I recall correctly it was around 1,800 for everything. Not cheap. Any minor paint fixes I've just done myself there after because I have an hvlp gun and compressor at home. Anyway if you have any other questions just pm me so we're not running a long thread in the classifieds section. Thanks.
08-22-2017, 06:02 AM
