Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   3rd Generation Maxima (1989-1994) (https://maxima.org/forums/3rd-generation-maxima-1989-1994-8/)
-   -   Why i haven't driven my Maxima in over 4 months.... Lots of Pictures!!! (https://maxima.org/forums/3rd-generation-maxima-1989-1994/164048-why-i-havent-driven-my-maxima-over-4-months-lots-pictures.html)

Sith Jun 15, 2003 08:22 PM

Why i haven't driven my Maxima in over 4 months.... Lots of Pictures!!!
 
Been along time since i've posted or even browsed these forums. The maxima has been sitting for over 4 months and i just now got my parts back.
I took alot of pictues through the process and figured i would post up the pictures of the first half. I got some pictures of the parts but there on my camera and i haven't got them off yet so for now here's the before pictures.

http://briefcase.yahoo.com/sithmax92

There kind of backwards so it starts with the end of the tear down. Then up to my car as a whole before we ripped into it. There big pictures so have fun.
I should have the pictures of my parts Now uploaded maybe later tonight or tomorrow. I get to start putting it back togeather tomorrow. Woohoo

todamax Jun 15, 2003 09:35 PM

link seems not so good. :)

Sith Jun 15, 2003 09:49 PM

you were correct
should be fixed now.

Thanks

GReDdyXMaXiMa Jun 15, 2003 09:49 PM

It isnt working.

Sith Jun 15, 2003 09:52 PM

I changed the link above.

Try again it should now

rbloedow Jun 16, 2003 12:13 AM

The error is Yahoos fault, not yours.

MaDMaX024 Jun 16, 2003 06:55 AM

Re: Why i haven't driven my Maxima in over 4 months.... Lots of Pictures!!!
 

Originally posted by Sith
Been along time since i've posted or even browsed these forums. The maxima has been sitting for over 4 months and i just now got my parts back.
I took alot of pictues through the process and figured i would post up the pictures of the first half. I got some pictures of the parts but there on my camera and i haven't got them off yet so for now here's the before pictures.

http://briefcase.yahoo.com/sithmax92

There kind of backwards so it starts with the end of the tear down. Then up to my car as a whole before we ripped into it. There big pictures so have fun.
I should have the pictures of my parts Now uploaded maybe later tonight or tomorrow. I get to start putting it back togeather tomorrow. Woohoo

did your upper intake manifold have a coating of oil inside?

Sith Jun 16, 2003 04:18 PM

Look at the pics

but to answer your question.

Yes cylinders 1,3,5 all had a small bit of oil in them.

We were going to pull the heads off and replace the valves and springs with SR20 springs and custom valves but it was to much work


All times are GMT -7. The time now is 06:48 PM.


© 2026 MH Sub I, LLC dba Internet Brands