Pics of a ASP Pulley with Sleeve installed
#43
Originally Posted by chrgdRapa
what does it do, would it help idle? or power? and where do we get a good one
#44
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
Originally Posted by MyGreenMax94
The udp slows down all your accessories{alt.a/c,wp,psp] so their is less of your horsepower going to spinning these accessories. so you get more poneys to the wheels.You get them from here...http://www.sportcompactonly.com/bran...OVMTC=standard
Also VG guys, you can call up Unorthadox Racing and get a blehmished() unit for half price.
#48
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
I just picked up my new seal today....
either i have the wrong one, or its going to be a very very tight fit, if this is the right one, I can understand why they had to put the sleeve on
either i have the wrong one, or its going to be a very very tight fit, if this is the right one, I can understand why they had to put the sleeve on
#50
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
Originally Posted by Jeff92se
I just put mine back on but I didn't bother to change the seal. It was new when I took it off to have it sleeved. But I see some leaks now. Duh!
I still haven't put mine on
#54
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
Originally Posted by Jeff92se
I knew I beat you. btw. why are selling the eibachs/toks I sold you?
Because I'm getting Koni's
#57
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
Originally Posted by Jeff92se
Wha? Try a month and a half? Konis? Nice. But why sell the springs?
I was going to do it today, but now i've procrastinated the day away
#62
Seal that goes on the crank right behind the front crank pulley.
Originally Posted by internetautomar
are you asking them for the crank seal or for the timing cover seal?
National # for Timing cover seal is 223340
National # for Crank (AKA Rear main) seal is 228410
National # for Timing cover seal is 223340
National # for Crank (AKA Rear main) seal is 228410
#68
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
Originally Posted by Jeff92se
Someone have the crank seal p/n for the VE? Napa keeps giving me the wrong damned one. I think I had it on Chris's jdm swap sheet but I forgot where I put that.
#72
Dealer is the same price or cheaper so screw Napa for this one. They also had it stock at Yonker Nissan. I'm getting the VE seal 13510-97E10 right now. I suppose if you gave Napa this p/n they might be able to cross it but it's not any cheaper.
#73
Originally Posted by Jeff92se
Someone have the crank seal p/n for the VE? Napa keeps giving me the wrong damned one. I think I had it on Chris's jdm swap sheet but I forgot where I put that.
Jeff, welcome to maxima.org, please read the FAQs before asking any questions
it's on my UDP writeup on 4dsc and my site
"...The part for the VE engine is 13510-97E10..."
#74
Yeah I knew the Nissan p/n was there but I was trying to get the right Napa p/n as they are more convenient sometimes.
Originally Posted by «§»Craig B«§»
just saw this post, I know I'm a couple days late, but oh well
Jeff, welcome to maxima.org, please read the FAQs before asking any questions
it's on my UDP writeup on 4dsc and my site
"...The part for the VE engine is 13510-97E10..."
Jeff, welcome to maxima.org, please read the FAQs before asking any questions
it's on my UDP writeup on 4dsc and my site
"...The part for the VE engine is 13510-97E10..."
#76
Okay I'll let you and Craigmount pop over there have your falsie glory. hehe.
Considering I did the crank seal on Chris jdm, don't you think I'd have the Nissan one already??
Originally Posted by internetautomar
yeah, sure jeff. you were just
#77
Originally Posted by Jeff92se
Okay I'll let you and Craigmount pop over there have your falsie glory. hehe.
Originally Posted by Jeff92se
Considering I did the crank seal on Chris jdm, don't you think I'd have the Nissan one already??
#78
Originally Posted by Jeff92se
Okay I'll let you and Craigmount pop over there have your falsie glory. hehe.
Considering I did the crank seal on Chris jdm, don't you think I'd have the Nissan one already??
Considering I did the crank seal on Chris jdm, don't you think I'd have the Nissan one already??
#79
Supporting Maxima.org Member
Thread Starter
iTrader: (30)
Join Date: Apr 2002
Location: 127.0.0.1
Posts: 40,647
Originally Posted by Jeff92se
Dealer is the same price or cheaper so screw Napa for this one. They also had it stock at Yonker Nissan. I'm getting the VE seal 13510-97E10 right now. I suppose if you gave Napa this p/n they might be able to cross it but it's not any cheaper.