New Car Y'aLL! (OG's wur you at?)
 

So with pearly's transmission blown.. she's gonna be down for the count while I do the 5-spd swap/control arms/front+rear sway bars/a few oil and power steering leaks/some random mods..... etc. So I needed a car to get to work and back in the meantime... I just happened to stumble upon this for dirt cheap...

1993 Nissan Sentra SE-R
120k miles
SR20DE
5-spd
LSD
IRS
New clutch at 94k
New paint job in December (including jams and hood)
New alternator/battery (today- the seller covered it)

http://i46.tinypic.com/fo0v0w.jpg

http://i48.tinypic.com/23vay2x.jpg

http://i49.tinypic.com/6ocrgn.jpg

excuse the blurry sub-par pictures... camera wouldn't focus and the batteries kept going dead. But this is what really got me:

http://i48.tinypic.com/20qkg37.jpg

http://i50.tinypic.com/10qhojq.jpg

It needs a new headliner, valve cover gasket, CV boot (not clacking yet), and the passenger hand side tail light has a crack/hole in it on the very corner... but other than that I couldn't be more happy.

I know it's FWD and all, but all I can think is SR20DET

wtg? the pics are taking fore-evAR to load...
and how did you blow your transmission? rizer-azz neutral drops?

Your picture host isn't loading :gotme:

damn, what a way to blow the intro :bawling:

howbout' now?

pics are good now. looks sick, how much?

and WERE you doing neutral drops/shifting while moving :squint:

Wow, looks awesome. I always loved those things. I hardly EVER see any of those around, and the few I have seen in the past few years have always been red.

Is the new paint job nice or is it a kind of cheapo one? And that interior looks flawless!

yeah, pics look good, now.

btw, meet blootoof's 3rd gen replacement:
oh, like you don't:D

never a neutral drop, and literally i stop 3-4 seconds before shifting. my dad and grandfather always shifted while moving and its so fking stupid, cant have a extra few seconds of patience to not put all that stress on the tranny.

i actually had some b1tch nail the horn at me backing out of my driveway a couple of weeks ago because i took too long to shift :laugh:

downshifting while moving? Yes. Drop shifts from a stop? Hail no, but I can't say I wasn't harder on it than most drivers- it was a tired unit from the get-go though...

This one used to be red, but was stripped and painted- I can see a few hard to get to spots in the engine bay need to be touched up, but I can't complain. It isn't a showcar quality paint job by any means- probably in the range of $800-1000- but better than 1993 stock nissan factory paint :p

Yeah, the interior just threw me, not what I expected, it had a steering wheel cover so I assumed the wheel was typical for age.. but it was in great condition (I guess from the cover..?) the headliner is a bit sad right now, but I want to pick out something cool to do up there.. I basically just have to pay for the price of materials since I have a friend from work (advance) helping me put it in. Any Idea's?

microfiber

when the max is running either boost the fcuk out of that thing or do a VQ35 swap.....:chuckle:


if power is not what u want to do, those little sentras can be nasty on the autoX with some coilovers and wide rubber. :nod:

start saving for a GTiR engine. :grinno:

Oh, and transmission fixes. 5th gear pop out.

I was looking into those -- they are great cars all around. Handle very well and awesome sleeper car. There are several in the Northwest with swaps. I talked with a guy a few days ago that has one and I think he said it's around 300 whp with minimal mods.

I want to do intake/headers/UDP/flywheel- I need to research the b13 more past those though, not sure how beneficial putting money into a post header exhaust system is. I was reading a little and saw that like the max these things have barely any strut clearance... but finding some way to lower and beef up suspension through semi-inexpensice chassis braces/swaybars is definitely on my to-do- along with wheels and tires- but this is thinking longer term.

nice pickup! looks really clean time to mod her

I've read about the 5th gear pop out on SR20 forum, hopefully it won't show it's *** anytime soon.

They are a nice little package, all around. Some people might ***** that it's not RWD- but for getting around town quickly (and on a budget with gas!) it's wonderful. Truly a blast to drive, extremely maneuverable, great turn radius (I feel like I'm pivoting off of the back wheel compared to the 3rd gen)- and a lot of aftermarket support as I'm finding. Kind of a cult car I've always had a secret obsession about. But there's something to be said about that early 90's 'pioneer's' of sport compact cars feel though. Nissan was making some good car's there for a while.

Lookin nice mang :)

fcuk it pull the hell out of the fenders and put some 17x10s on it :laugh:

hah, I do think the squatted with wide tires look would go really well with the body style. I'm a conservative as far as going all out. Function over form for daily use.

Nice Minimax.

I've always wanted a nice se-r like that. Good find! :)

you lucky SOB. well, looks like im gonna have to snatch my sister's '94 sentra limited edition 4dr 5spd for a project car if she lets it go and i get rid of the bimmer.

Hah, it's funny you say that, I wanted to get a custom license plate that said minimax

Yeah, would make a cool project car, people do some really cool things with them. Some of the one's in this video are pretty neat- minus the ghey music.

http://www.youtube.com/watch?v=_07RFxlWulI

Aw u lucky S.O.B. I'm of course older than the car but have only seen one as an SE R up until 2 weeks ago for the first time ever. You rarely see those down here in Texas. You'll have a better chance at catching a regular one or a s12 before you see that. DON'T LET IT GO!

nicee
 

Nice man, looks clean.

I built a b13 a couple years ago. I am looking for some pics to post up but here is the mod list. The thing was stupid fast. Low 12s on street tires.

1992 Nissan Sentra SE-R
Corvettehttp://images.intellitxt.com/ast/adTypes/2_bing.gif C5 Red Recently Painted


Motor
JDM 9.5:1 with 45K miles
JWT S4 cams
Greddy Rockerhttp://images.intellitxt.com/ast/adTypes/2_bing.gif Arm Stoppers

Turbo
Nissan GTiR T28 Turbo
GTF 3” Down pipe
VRS 3” Cat back exhaust with single tip muffler (no catalytic converter and no resonator)
Forge Motorsports Front Mount Intercooler with custom piping
Greddy Type-S BOV
PC Fuel Rail with MSD 50lb Injectors
Walbro 255 Fuel Pump

Suspension
KYB AGX Struts
Ground Control Coil overs 350f/250r
Front and Rear Strut Bar

Brakes
NX2000 Front brakeshttp://images.intellitxt.com/ast/adTypes/2_bing.gif
Stainless steel brake lineshttp://images.intellitxt.com/ast/adTypes/2_bing.gif

Body
Stillen front bumper cover
Tsuru headlight conversion with HID’s
Tsuru tail lights

Electronics
JWT ECU programmed for Cobra MAF
Greddy E-Manage (custom tuned)
Apexi Turbo Timer with Air Fuel Meter
Autometer Gauges – Oil Pressure, Boost, Voltage
[Phantom Series white face black bezel]

Wheels
16X7 Rota C8 Bronze with polished Lip
Kumho 712 205/45/16 Tires

Transmissions
Clutch Specialties Stage 3
Fidanza Flywheel 8.8lbs
SMC Short Shifter

Extras
Clear Front Sidemarkers
Corbeau A4 Sport seats
Batter relocation kit
Universal Oil Catch Can
Grounding Kit
Cobra MAF
ES Shifter bushing
TurboXS MBC
Prothane Motor Mounts
Custom Steel H20 Adapters
JDM Power Folding Mirrors
7" Inovatek Monitor in the Passenger Visor
Nismo Shift Knob

You check around on youtube there is a guy who did a complete AWD SR20det conversion on a b13 SE R. Its very impressive if you ask me.

i simply refuse to make any comments about the shape of the shifter :ugh:

Not bad!

You ARE keeping the Maxima, right?

great platform for a sleeper.

Nice sentra! Great find!

psh he's been talking about doing a 5spd swap since at least late 2008... I was originally planning on taking his a/t back to try and figure out the electronics needed to make a VE auto tranny work on a VG motor. Never got around to it tho.

I think I've seen this one... he took the RWD setup from an older sentra right? Thing was beastly.

But it's thoooo comfortable in my hand! :kiss:

Definitely keeping the max, it's been needing work and I haven't had time to have the car down for me to work on it so I've basically been driving it into the ground. It needs a lot of front end chassis/suspension work (not that hard), of course the 5-spd swap and all the goodies (ACT, Fidanza, stainless braided lines) and some other random annoying stuff... I just want to rip her apart and do it all at once to save the headache. If I get pissed off at her, I can walk away and go drive the sentra for a while and come back.

New daytime pic:

http://i47.tinypic.com/f9qm8k.jpg

i bet it is :ugh:

Who did you buy this off of? Some old women? I know no SR20 junky since its untouched.




Hah! A grandma with a SE R Sentra.


Wait my grandma has 3.5 Altima at 78. :laugh:

Hell keep it stock! It's clean or do you just really know how to detail? I see the later Sentras getting hooked up with VQ35 swaps, but I'm not sure the VQ35 will fit in that platform without major modifications....but it's definitely a smaller car with a good chassis and plenty of parts available....I would go the stock route until you finish your beauty (93 Max), maybe throw a few bolt-ons at it......

yeah it looks good man...love how clean the interior is on it...i'd just throw a few simple bolt on on it...and maybe some exterior mods but thats pretty much my style anyways lol...conserve that gas mileage cause gas prices aint gonna ever be the same as they were 3-4 years ago lol...man and back then i thought a gallon of gas was high..now im begging for that price per gallon 3-4 years ago lol

My favorite Sentra. Nice find

:wall: http://forums.nicoclub.com/zerothread?id=368844&page=1

That is bada**! I had 2 "classic" B13s. 1991 and 1993. The SR20 is an amazing, easy to work on, reliable, cheap motor that makes great power/torque for the B13 chassis! With the clutch being fairly new (I think you said it was replaced about 30k ago), you should be able to chirp 3rd pretty easily. The whole 5th gear popout thing is something you usually either have or you dont. It all depends on who owned the car previously and how they drove. I've heard that it happens due to the driver resting their hand (and the weight of their arm) on the shifter for long periods of time while cruising in 5th gear (thus warping the shift forks). Both of my B13s did NOT have the problem when I bought them and neither developed it. It can be rebuilt for $350 in parts (Courtesy Nissan 5th gear pop-out kit) and about 3 hours start to finish. You could also do a B15 or P11 trans swap (the limited slip models go for about $1000-$1200 with low miles) that is a much beefier trans. It will go in with minor modification. It looks like you got a hell of a clean B13, congrats! Also, the site SR20forum.com is VERY helpful.

good point but dont forget about it and let the sentra take over as the new money pit!

clean car, good luck w/ it.. and put some bigger tires on