![]() |
93 se revival - 87'octane use and oil on my plugs
I'm trying to get my 93 maxima se 5 speed 253,000 miles... running again,it ran great then one day ran super rough like one cylinder wasn't working after checking the plugs i found oil pretty thick on one plug "it's sat for a whole year since"didnt have time to fix until now.
Iv'e purchased valve cover gaskets and new plug wires/plugs i hope this does the trick .. is there a way to clean the injectors or undo the harm the 87 octane did if any ?:confused ..my ex-girlfriend was cheap and used the wrong fuel is this car worth fixing ? i hope so appreciate any tips :cool: |
87 octane will just cause pinging, nothing to do with harming the injectors. nothing you need to do but use 91+ octane next time, most likely did no damage unless you drove it hard on a warm day
|
If you have a 93 SE you didn't buy plug wires for your car because your car doesn't have plug wires
|
I had a VE with oil on the plug, and compression was non existent in the cylinder.
Granted the car had been run without oil, or even an oil filter by the previous owner. The other 5 cylinders were fine, even beat my friend in his 72 Cuntless. And sold it for a $500 profit. Run compression check, if it passes, replace the injector(s). |
[QUOTE=James92SE;8981482]If you have a 93 SE you didn't buy plug wires for your car because your car doesn't have plug wires[/QUOT
:laugh: duh.....I'm feeling stupid about now...i forgot been so long since i worked on it ...definitely returning em.... |
2 yrs ago it had better than stock compression the smog guy told me somebody modified the motor probably...wasn't me.
I'm wondering if i should replace anything else other than valve cover gaskets since i have to take the intake off too..wait a pain in the *** |
Originally Posted by chrome91
(Post 8981475)
87 octane will just cause pinging, nothing to do with harming the injectors. nothing you need to do but use 91+ octane next time, most likely did no damage unless you drove it hard on a warm day
thanks .....i had a 88 hardbody also -reliable little truck.fast with a new muffler/airfilter and chip. |
Originally Posted by RacerXX
(Post 8981724)
:laugh: duh.....I'm feeling stupid about now...i forgot been so long since i worked on it ...definitely returning em....
Originally Posted by RacerXX
(Post 8981731)
thanks .....i had a 88 hardbody also -reliable little truck.fast with a new muffler/airfilter and chip.
|
Originally Posted by RacerXX
(Post 8981726)
2 yrs ago it had better than stock compression the smog guy told me somebody modified the motor probably...wasn't me.
I'm wondering if i should replace anything else other than valve cover gaskets since i have to take the intake off too..wait a pain in the *** |
ethanol should be nowhere near old Japanese vehicles, eats the injector O-rings and other seals. all of my stuff i only run Esso 91, no ethanol in it
|
| All times are GMT -7. The time now is 02:33 AM. |
© 2026 MH Sub I, LLC dba Internet Brands