If You Need A Part Let Me Know
I have had many parts cars and still have a few of them. So that means i have plenty of parts. I have way to much to even start a list.I am not willing to ship larger parts but it doesn't hurt to ask. So if you need something let me know.
|
black exterior door handle for the front passengers side door.. black handle in a black casing.. $10 shipped..
|
pm box is full,
Looking for molded mud flaps, got any? |
5 Speed shifter bezel with shift boot and shift knob lol I know its hard to find like a needle in a haystack but worth a try... Also I need the OEM tail lights from a 97-99 maxima.... The clock from the center console... Send pics to jassalvishal@gmail.com and let me know about the price shipped to 19116
|
97 Manual ECU
|
do you have any leather seats? black leather would be preferable...
|
99 5spd Cali Spec ECU
|
hey, I've been looking for a black trunk lid for a 96 SE.
|
Looking for a set of Fogs lights, Brackets, and Bulb Harnesses for a 97 Max. PM me if you have a set on one of your cars.
|
Driver Side Tan Leather Seat Needed Shipped To Ga 30044. Thanks Let Me Know.
|
4th gen upper and lower oil pans?
|
98-99 black leather front seat backing with map pocket. (seat must be an airbag seat)
|
wtb 4th gen tranny
i need a 4th gen tranny u got any 5 speeds layin around in one of those cars?
|
Originally Posted by wirelessdude04
5 Speed shifter bezel with shift boot and shift knob lol I know its hard to find like a needle in a haystack but worth a try...
|
i need an ac compressor for a 97 maxima....shipped to NY 11413...
|
how much for the radiator fan assembly shipped to 11968?
|
Do you still have those plastic covers that go under the motor..I cant find the thread with the pictures
|
Originally Posted by midnight0045
black exterior door handle for the front passengers side door.. black handle in a black casing.. $10 shipped..
Originally Posted by Steve68
pm box is full,
Looking for molded mud flaps, got any?
Originally Posted by wirelessdude04
5 Speed shifter bezel with shift boot and shift knob lol I know its hard to find like a needle in a haystack but worth a try... Also I need the OEM tail lights from a 97-99 maxima.... The clock from the center console... Send pics to jassalvishal@gmail.com and let me know about the price shipped to 19116
Originally Posted by onenonlyquan
do you have any leather seats? black leather would be preferable...
Originally Posted by 99BlackMaxMS
99 5spd Cali Spec ECU
Originally Posted by Guryon
hey, I've been looking for a black trunk lid for a 96 SE.
Originally Posted by th0ught
Looking for a set of Fogs lights, Brackets, and Bulb Harnesses for a 97 Max. PM me if you have a set on one of your cars.
Originally Posted by hiren_patel_83
Driver Side Tan Leather Seat Needed Shipped To Ga 30044. Thanks Let Me Know.
Originally Posted by mtrai760
4th gen upper and lower oil pans?
Originally Posted by erty67
98-99 black leather front seat backing with map pocket. (seat must be an airbag seat)
Originally Posted by asperos28
i need a 4th gen tranny u got any 5 speeds layin around in one of those cars?
Originally Posted by nycspudz03
i need an ac compressor for a 97 maxima....shipped to NY 11413...
Originally Posted by madmax98
how much for the radiator fan assembly shipped to 11968?
|
Originally Posted by MidniteMaxSE
Do you still have those plastic covers that go under the motor..I cant find the thread with the pictures
I still have plenty of them. For some reason the picture hosting site has been down. |
Do you have the vents from the center console in black?
|
97-99 front plate bracket $10 shipped?
|
Originally Posted by TurTLe*
97-99 front plate bracket $10 shipped?
|
Originally Posted by QnzMax
Do you have the vents from the center console in black?
|
PM Sent on the oil pans.
|
do you have a 97 grill?
|
u got keyless remotes?
|
Originally Posted by a1lama
do you have a 97 grill?
|
Originally Posted by vuiskool
u got keyless remotes?
|
Sent you a PM, thanks
|
Do you have any rear bose speakers with amps for a '97? Also my spoiler led burnt out if you have one?
|
hey fanaticrockford, I need a map/baro solenoid valve and a rear o2 sensor.. This o2 sensor is located directly in the cat and some maximas seem to have a different setup. It's thinner and longer than the other sensors and the harness goes up under the drivers seat area. If you have either part let me know, thanks.
|
Idler Pulley Blacket Bolts
I don't know if you are willing to sell such a small thing, but I need 3 12mm bolts that holds the blacket for idler pulley/drive belt tensioner to the side of an engine. I don't need the blacket or pulley, just 3 bolts.
If you have black leather e-brake handle, I will buy it as a package with the bolts. Please let me know the availability and price to Zip 41005, if you are willing. |
96 Maxima SE Ignition Switch Harness
I need the harness that goes from the ignition switch to the car. My car is having some difficulty starting. I think the contact for the fuel pump is messed up in that harness. Let me know what you got...PM me.
|
Do you have an ebrake line? If so how much.
|
Originally Posted by VTMaxima
Do you have any rear bose speakers with amps for a '97? Also my spoiler led burnt out if you have one?
|
Originally Posted by foxracing12
hey fanaticrockford, I need a map/baro solenoid valve and a rear o2 sensor.. This o2 sensor is located directly in the cat and some maximas seem to have a different setup. It's thinner and longer than the other sensors and the harness goes up under the drivers seat area. If you have either part let me know, thanks.
|
Originally Posted by hasei
I don't know if you are willing to sell such a small thing, but I need 3 12mm bolts that holds the blacket for idler pulley/drive belt tensioner to the side of an engine. I don't need the blacket or pulley, just 3 bolts.
If you have black leather e-brake handle, I will buy it as a package with the bolts. Please let me know the availability and price to Zip 41005, if you are willing. |
Originally Posted by 96mAx2fast
I need the harness that goes from the ignition switch to the car. My car is having some difficulty starting. I think the contact for the fuel pump is messed up in that harness. Let me know what you got...PM me.
|
Originally Posted by ajcool2
Do you have an ebrake line? If so how much.
|
Flywheel with ring gear?
|
All times are GMT -7. The time now is 07:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands