Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   4th Generation Classifieds (1995-1999) (https://maxima.org/forums/4th-generation-classifieds-1995-1999-43/)
-   -   F/S: '01 AE Auto trans w/ VLSD (https://maxima.org/forums/4th-generation-classifieds-1995-1999/406372-f-s-01-ae-auto-trans-w-vlsd.html)

Vlasic 08-20-2007 09:08 PM
F/S: '01 AE Auto trans w/ VLSD
 
SOLD


Trans came off an '01 AE with ~60k miles and has VLSD.

I want to sell this local, will deliver if you are on the way to Sac or LA. I might consider shipping, but would have to find out a price, shipped price would be more. Will bolt up to a 4th gen, you will need a driver side LSD axle.

Looking for $400 obo. Money order only, no paypal.

As of right now I am not shipping, its just going to be too expensive. As of right now Im just selling this locally until I can find a reasonably priced way to ship it. By local I mean Sac to LA, I make trips to both and can deliver.


http://zy.athost.us/forsale/trans.jpg
http://zy.athost.us/forsale/trans2.jpg

absoundlab 08-20-2007 09:23 PM
can you post a picture of the axel holes

Vlasic 08-20-2007 09:56 PM
I dont have any pictures on hand without the gloves in the holes and the trans is downtown at my shop, Ill try and get a picture the next time I go down there.

accordingtou 08-20-2007 10:06 PM
Vlsd 4 Sure
 
Good price man really good
I thought you needed the drivers side axle though.
Originally Posted by absoundlab
can you post a picture of the axel holes
You can tell by the drivers side axle seal (bigger)that it is a vlsd.

maxboy325 08-20-2007 10:14 PM
you have a pm

Vlasic 08-20-2007 10:21 PM
oh is it the driver side axle thats bigger? I forgot.

A33 VQ30DEK 08-21-2007 01:51 AM
i can vouch that it's an AE LSD tranny, it came off my vehicle when i did the swap.. if you guys need a axle.. i still have it in my garage.

goldtooth 08-21-2007 04:45 AM
anything wrong with it? all gears work perfectly fine?

Kevlo911 08-21-2007 05:08 AM
I have a NEW vlsd raxle axle incase anyone wants it :)

A33 VQ30DEK 08-22-2007 10:27 PM
Originally Posted by goldtooth
anything wrong with it? all gears work perfectly fine?
every works fine... it worked great when it came off my car... no slippage and shifts smoothly

Nightkid08 08-23-2007 08:09 AM
compatible with vb mod?

Vlasic 08-31-2007 12:05 AM
Well shipping looks like it is going to be ridiculous. Im going to continue looking for a decently priced way to ship it, but for now Im going ot have to limit this to local guys only. By local I mean Sac to LA :).

grey99max 08-31-2007 08:28 PM
Originally Posted by Vlasic
Well shipping looks like it is going to be ridiculous. Im going to continue looking for a decently priced way to ship it, but for now Im going ot have to limit this to local guys only. By local I mean Sac to LA :).
So how much is shipping on a pallet??? $200 - $250 ???

Vlasic 08-31-2007 08:43 PM
UPS wanted $600 to ship it freight on a pallet. Gonna call FedEx and DHL tomorrow.

grey99max 09-01-2007 09:29 AM
Originally Posted by Vlasic
UPS wanted $600 to ship it freight on a pallet. Gonna call FedEx and DHL tomorrow.
Wow - that's way out of line - you might check with local salvage yards on how they ship stuff - $200-$250 is about right for that tranny. Do a quick search on car-part.com for our trannys and call a few for shipping costs - some show it.

It's usually cheaper if you ship to a business instead of to a residence, in my experience.

I'm interested, I have a VLSD installed now, but I suspect my 3.5 update will be hard on transmissions, so I'm looking for another. Yours sounds good - but I'm in Kansas.

Edit - maybe you could find a local yard that could palletize (sp ?) and ship the tranny for a few extra bucks?

Kevlo911 09-01-2007 11:06 AM
I am pretty sure it will be cheaper if you look at freight companies and not door to door companies.

Steve68 09-01-2007 12:28 PM
Look into Foward Air. I sent a rear end to San Fran from FL for $84 dollars it weighted 220lbs freight co's are cheaper!

It was on a 2x4 and 4x4 pallet.

Vlasic 09-01-2007 01:17 PM
wow! Ill deffinitely look into some creight companies.

ptatohed 09-02-2007 01:35 AM
Vlastic, I might be interested. Sorry, I am a little ignorant with limited slip. What are the exact benefits? Are you sure this will bolt right on my '99? I know you mentioned needing a driver side LSD axel, is that all I would need? Would you be able to meet in L.A.? Thanks.

grey99max 09-05-2007 07:14 AM
Originally Posted by Vlasic
wow! Ill deffinitely look into some creight companies.

Any progress with shipping companies ??

grey99max 09-15-2007 06:04 PM
Originally Posted by grey99max (Post 5021560)
Any progress with shipping companies ??
Still asking the question:

"Any progress with shipping companies ??"

and " is this transmission still for sale?"

:confused:

Vlasic 09-18-2007 11:59 AM
Sorry for the delay, I finally got a shipping quote.

Using Forward Air Freight it would cost about $85 shipped anywhere and they do provide tracking. The only thing though is that they do not deliver, it gets dropped off at their "terminal" and then you would have to pick it up. If anyone is still interested I could probably have it ready by this weekend or early next week. I just need to source a pallet and tie it down.

ptatohed 09-18-2007 02:21 PM
Post #19 ignored. :(

Vlasic 09-18-2007 03:45 PM
Sorry, totally overlooked this.

Originally Posted by ptatohed (Post 5016540)
Vlastic, I might be interested. Sorry, I am a little ignorant with limited slip. What are the exact benefits? Are you sure this will bolt right on my '99? I know you mentioned needing a driver side LSD axel, is that all I would need? Would you be able to meet in L.A.? Thanks.
The benefit of a limited slip is that the transmission is giving equal power to both wheels so you get better traction off the line. The transmission will bolt right up to your 4th gen, its the same motor. Ive read about a bunch of other people putting 5th gen autos into 4th gens, all they had to do was a little bit of electrical work like rewireing some sensors, not entirely sure. I have a thread saved a while back about putting this into a 4th gen but I dont know where it went. You will need an LSD driver side axle but if my friend still has his then I will include it. I would be able to bring the transmission with me on ym next trip to LA, but Im not sure when that will be, but with this freight company, shipping isnt really an issue now.

ptatohed 09-18-2007 11:42 PM
Originally Posted by Vlasic (Post 5951966)
Sorry, totally overlooked this.



The benefit of a limited slip is that the transmission is giving equal power to both wheels so you get better traction off the line. The transmission will bolt right up to your 4th gen, its the same motor. Ive read about a bunch of other people putting 5th gen autos into 4th gens, all they had to do was a little bit of electrical work like rewireing some sensors, not entirely sure. I have a thread saved a while back about putting this into a 4th gen but I dont know where it went. You will need an LSD driver side axle but if my friend still has his then I will include it. I would be able to bring the transmission with me on ym next trip to LA, but Im not sure when that will be, but with this freight company, shipping isnt really an issue now.

O.k., thanks. Could you please get back to me regarding your next trip to L.A. and if your friend still has his axle? If this fits in a 4th gen, then I am very interested. I could meet you in L.A. any weekend. Thanks!

- Josh

A33 VQ30DEK 09-19-2007 09:16 AM
i still have the axle. It's sitting in my garage.

phenryiv1 09-19-2007 12:15 PM
http://forums.maxima.org/showthread.php?t=537538

grey99max 09-19-2007 12:37 PM
Originally Posted by Vlasic (Post 5951491)
Sorry for the delay, I finally got a shipping quote.

Using Forward Air Freight it would cost about $85 shipped anywhere and they do provide tracking. The only thing though is that they do not deliver, it gets dropped off at their "terminal" and then you would have to pick it up. If anyone is still interested I could probably have it ready by this weekend or early next week. I just need to source a pallet and tie it down.
You have an earlier PM. And Forward does have a regional hub at MCI - Kansas City - so that could work.....


All times are GMT -7. The time now is 04:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands