FS: Custom CNC'd IACV plate for relocating or 00VI
 

http://img153.imageshack.us/img153/5...5563wy6.th.jpg
http://img84.imageshack.us/img84/6113/img5564ky8.th.jpg
http://img401.imageshack.us/img401/9...5566vp3.th.jpg

$65 shipped

Paypal: tomtruchan@gmail.com (No credit or debit)

How much are they new?

i think his is new...you arent gonna find these sold by a company new, hence the "custom made" part

I know they're custom (by stephen), I just haven't searched how much ppl were paying for a un-used one...Anyways might just run the 5th gen IACV, read that adjusting the idle's a pita. thanks

So I have always wondered about this, if I have the 2000 upper, lower, fuel rail and injectors, and tb, is this the only other thing I need? Ready to buy also.
Thanks
Zack

it all depends on how you want to rig it up, you could use the 00 iacv and not use this. as far as i know this adapter plate makes it easier to hook up the iacv. however then you will need a block off plate with vacuum lines for below 00 TB where the 00iacv goes.

and also when you say is this everything i need...you could also use a 00 rear valve cover and rear ignition coils or you could customize the 4th gen ones.

also you will need a 00 egr guide tube or a block off plate for that too.

it all depends on how you want to rig it up.


and also you will need some sort of rpm switch ofcourse


...damn i cant wait to finally be able to afford an 00vi, ive done so much research....for some reason i just bought a snow board instead...

Well, I bought mine new from StephenMax a few years ago (don't recall the price), but the one being sold here certainly isn't the same design. Mine has a circular relief about an inch-and-a-quarter in diameter machined on the face that marries up to the IACV, and a single hose nipple in the middle of that coming out the back side. For the life of me I don't understand why you'd want or need 2 hose nipples on the back: there's only one function that the IACV performs, and even then lots of guys have a hard time figuring out where to hook up one hose to the UIM (let alone two).
Don't see any reason why this one wouldn't work, but why the 2 hose nipples is a mystery.

I had a hard time getting the 3.5 swap to idle right, so I decided to try something new.....

ttt

if you can do 60 shipped, consider it sold.

paypal it and its yours

payment sent
do you happen to have gasket for iacv?

no, but you can go to an auto parts store and get a sheet or a roll of gasket material and trace the outline and cut one urself, thats what i did.