FS: 1998 Maxima Random Parts
Selling some parts off the 1998 Maxima SE I had towed away last winter. Listing shipped prices in this post. Pictures and part descriptions will be added.
AC Compressor $80 Alternator $70 Front Calipers & Brackets $120 Modified Valve Body SOLD Lower Steel Oil Pan $30 |
AC Compressor
Driveworks AC compressor in great condition. PN DW67424. Mounting bolts are included.
https://cimg3.ibsrv.net/gimg/maxima....3e9e69a4b0.jpg https://cimg5.ibsrv.net/gimg/maxima....36bc0117b2.jpg https://cimg7.ibsrv.net/gimg/maxima....0fe5cfb648.jpg |
Alternator
Duralast Gold alternator made by Autozone in great condition. PN DLG13284. Mounting bolts are included.
https://cimg7.ibsrv.net/gimg/maxima....86d7e9555a.jpg https://cimg1.ibsrv.net/gimg/maxima....0028ca4818.jpg https://cimg3.ibsrv.net/gimg/maxima....19ddec25af.jpg |
Front Claipers & Brackets
Red powder coated calipers. The calipers were rebuilt with new bores & dusting shields and are well lubricated. The paint is cracked off in a few spots but no rust yet. The bracket bolts are included along with brand new guide pins, boots, bolts, and pad clip-ons. Used Banjo bolts are also included. OEM hoses can be added if needed.
https://cimg3.ibsrv.net/gimg/maxima....a301530ccb.jpg |
Modified Valve Body
This is a modified valve body. I installed the Transgo shift kit and new shift solenoids in 2012. It will fit a RE4F04A or RE4F04V.
A 2 year old AT pan and new gasket is included. All the VB mounting bolts and AT pan bolts are included. The Transgo shift kit not only makes her shift faster but it also gives the transmission a longevity of life. https://cimg9.ibsrv.net/gimg/maxima....f9496d488f.jpg https://cimg3.ibsrv.net/gimg/maxima....d85eb19be4.jpg https://cimg5.ibsrv.net/gimg/maxima....2319001603.jpg https://cimg6.ibsrv.net/gimg/maxima....d2e8741fc7.jpg https://cimg8.ibsrv.net/gimg/maxima....f2d2dbded6.jpg Transgo Shift Kit http://www.transgo.com/products.php?...dcountview=Yes Shift Solenoids https://www.courtesyparts.com/oem-pa...lve-3194080x25 VB Replacement Procedure http://maxima.theowensfamily.com/tsb/NTB98-043.pdf Tips when installing the pan and gasket: In different corners screw a few bolts halfway just to hold the pan up there. Don't use permatex thread locker on these bolts. Using a phillips screwdriver get the rest of the pan holes lined up with the gasket holes. Apply permatex thread locker to about 4 bolts at a time. Tighten them in place using only 7-9 lbs of torque. Too much torque will split the gasket. Take out those first bolts you screwed halfway and reinstall them with thread locker applied. |
Lower Oil Pan
Steel lower oil pan nearly rust free with a new paper gasket. Used mounting bolts included.
https://cimg0.ibsrv.net/gimg/maxima....0c955279c2.jpg https://cimg7.ibsrv.net/gimg/maxima....050e0c0726.jpg |
All times are GMT -7. The time now is 03:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands