Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   4th Generation Maxima (1995-1999) (https://maxima.org/forums/4th-generation-maxima-1995-1999-6/)
-   -   98-99 194 LED's wher do you get them (https://maxima.org/forums/4th-generation-maxima-1995-1999/237309-98-99-194-leds-wher-do-you-get-them.html)

superblack98se Jun 26, 2004 12:54 PM

98-99 194 LED's wher do you get them
 
Where do you guys buy your 194 LED's to change the color of the speedometer from?

aznprid972 Jun 26, 2004 12:56 PM

i thought the 98-99 models uses #74 bulbs.

try: http://www.superbrightleds.com/cgi-b...gi?product=CAR

im planning on ordering some bulbs from them soon

DAVE Sz Jun 26, 2004 03:20 PM

98-99 don't use either 194 or 74. The bulbs are proprietary bulbs. 74s will work however and you can get them here http://www.superlumination.com/ .

blkhawk500 Jun 27, 2004 04:53 AM


Originally Posted by Big D
98-99 don't use either 194 or 74. The bulbs are proprietary bulbs. 74s will work however and you can get them here http://www.superlumination.com/ .

I thought I read somewhere that 194's will work also, with a little dremelling though. is tht true?

Blackwind Jun 27, 2004 06:28 AM


Originally Posted by Big D
98-99 don't use either 194 or 74. The bulbs are proprietary bulbs. 74s will work however and you can get them here http://www.superlumination.com/ .

74 will work however its not nearly as bright as stock.

superblack98se Jun 27, 2004 06:32 AM


Originally Posted by blkhawk500
I thought I read somewhere that 194's will work also, with a little dremelling though. is tht true?

That is correct, that is what I am going to do since the light output is a lot more.

Blackwind Jun 27, 2004 06:37 AM


Originally Posted by superblack98se
That is correct, that is what I am going to do since the light output is a lot more.

could you send me a write up after your finshed?

superblack98se Jun 27, 2004 06:47 AM

all you do is take the cluster out(look in the how to's sticky), then just use the dremel and make the openings wider until the bulbs fit in... that simple

Blackwind Jun 27, 2004 06:49 AM

will dermmeling the hole affect the metal connectors?


All times are GMT -7. The time now is 10:53 AM.


© 2026 MH Sub I, LLC dba Internet Brands