2000-01 Tranny in 1996?
10-04-2004, 09:05 AM
#1
Guest
Posts: n/a
2000-01 Tranny in 1996?
I know there was alot of debate about whether or not this could be done with the existing axles and speedsensor's but did anyone do this succesfully w/o replacing the axles etc?
I am thinking of swapping in a 2k or 2k1 transmission, as mine is on the way out. What would I need on top of the actual transmission to make this work, and what are the benefits aside from a stronger tranny?
THANKS GUYS!!!!!!
I am thinking of swapping in a 2k or 2k1 transmission, as mine is on the way out. What would I need on top of the actual transmission to make this work, and what are the benefits aside from a stronger tranny?
THANKS GUYS!!!!!!
10-04-2004, 09:42 AM
#3
Originally Posted by slammed95
If it's non-LSD , it will go right in. If it has LSD you need a drivers side axle. And the shifter output on the 5th gen tranny is a different length, so it will make your ****er sit a little differently.
and also any other 5spd conversion parts for sale?
10-04-2004, 09:45 AM
#4
Differences are nothing important? How about a much stronger 3rd gear and no differential bearing issues to boot?? IMO, if you have to replace your 4th gen 5-speed there's no reason not to get a 5th gen tranny...
10-04-2004, 09:51 AM
#5
Originally Posted by nismology
Differences are nothing important? How about a much stronger 3rd gear and no differential bearing issues to boot?? IMO, if you have to replace your 4th gen 5-speed there's no reason not to get a 5th gen tranny...
10-04-2004, 09:52 AM
#6
Originally Posted by slammed95
I have a brand new LSD tranny with 0 miles for $999 to your door. Also have a non-LSD with low mileage for $600. The conversion parts are taken by someone who blew their auto tranny, but I can help you get the necessary parts and do the swap.
kind of saving up right now but i'll have funds ready soon.
Thanks
10-04-2004, 01:48 PM
#9
Originally Posted by slammed95
I have a brand new LSD tranny with 0 miles for $999 to your door. Also have a non-LSD with low mileage for $600. The conversion parts are taken by someone who blew their auto tranny, but I can help you get the necessary parts and do the swap.
10-05-2004, 09:15 AM
#13
i have a 2k1 in my car but i just realized i never asked if it had ABS or not. My car has ABS, does the driver side axle work on ABS/non ABS 5 speed's or was i just lucky or did all 5th gens come with ABS?
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
8
10-18-2015 06:57 PM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
10-01-2015 04:58 AM
pktaske
6th Generation Maxima (2004-2008)
0
09-04-2015 08:40 AM
