PoePoe2797

My front end feels really loose, and I hear some clunking in the front end. I'm thinking about changing out most of the bushings on the control arm. Anybody have any idea how easy/hard this is for an average person? Do you have to take the control arm off completely? I know my ball joints are on theyre way out also, so I might consider changing those as well, but who knows. Any opinions appreciated

*Also, what exactly is contained in a bushing "kit"

mzmtg

iTrader: (11)

The energy suspension bushing kit contains all of the control arm bushings. You can get a mcahine shop to press in new Moog balljoints for you as well. You must completely remove the control arm to do this work.

It's fairly difficult, but doable.

PoePoe2797

Does it make a big difference in the drive feel as opposed to stock? I get a lot of jerking when on and off the gas and whenever i go over bumps theres a decent size clunk no matter what speed

mzmtg

iTrader: (11)

I didnt have any major problems before, so I can't really comment on that. Steering feel did improve though.

1FSTMAX

iTrader: (29)

this was relatively easy for me.. but having the correct tools help... The most difficult part was getting the old bushings out..