Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   4th Generation Maxima (1995-1999) (https://maxima.org/forums/4th-generation-maxima-1995-1999-6/)
-   -   Please Help My 99 Maxima Won't Start Battery Good (https://maxima.org/forums/4th-generation-maxima-1995-1999/291997-please-help-my-99-maxima-wont-start-battery-good.html)

yeshivishmaxima Mar 22, 2005 08:03 PM

Please Help My 99 Maxima Won't Start Battery Good
 
Dear fellow maxima owners, please help!!!!! Today i parked my 99 Maxima as usual when i returned a minute later to my dismay, my maxima would not start. I have never had any problems before. The battery was tested and its fine. What happens when I turn the key is I hear the starter cranking the engine but it won't turn on. I towed it to the dealer he said he thinks its the fuel pump and he said it cost a few hundred $$$.

1)What do you think?
2) how to diagnose?
3) how much money?

p.s. remember the car was perfect until now, and i use premium 93 gas.

WielkiWaac Mar 22, 2005 08:15 PM

1. might be
2. turn the key to ON position, try to hear your pomp (would be better if someone help you with it)
3. go to www.abay.com and look for walbro fuel pomp for maxima. around 100$ shipped. and you can replace it by yourselfe.


http://vbxmaxima.8m.com/fuel%20pump.html

Before you do anything check fuses!!

G4nismo Mar 22, 2005 08:23 PM

check ur fuel pump fuse.

2 Da Max Mar 22, 2005 08:37 PM

yes check the fuel pump fuse, and the lines

G4nismo Mar 22, 2005 08:46 PM


yes check the fuel pump fuse, and the lines
thank you for repeating what i said. u could of just said check ur lines punk.
haha,j/k

yeshivishmaxima Mar 26, 2005 05:27 PM

Thanks Org. Members It Was A $5.oo Fuse, But After The Fuse Replaced I Got A "ses" The Mechanic Couldn't Diagnose With Scanner(snap-on) So He Reset It. Anyone Know What It Could Be?

adithius Mar 26, 2005 05:59 PM


Originally Posted by yeshivishmaxima
Thanks Org. Members It Was A $5.oo Fuse, But After The Fuse Replaced I Got A "ses" The Mechanic Couldn't Diagnose With Scanner(snap-on) So He Reset It. Anyone Know What It Could Be?

Read Stickys to check it yourself. There is a self diagnostic ECU for the 4th gen.

GodFather Mar 26, 2005 10:47 PM

if the ses light doesn't come on after the reset, then you are good. but if you still get codes, then go with what the codes tell you to check. you are still on the right track this way.

one question though, did the engine start after you replaced the fuse?

yeshivishmaxima Mar 27, 2005 09:16 AM


Originally Posted by cyu1
if the ses light doesn't come on after the reset, then you are good. but if you still get codes, then go with what the codes tell you to check. you are still on the right track this way.

one question though, did the engine start after you replaced the fuse?

YES THE ENGINE STARTED AFTER REPLACING FUSE!!!


All times are GMT -7. The time now is 12:36 AM.


© 2026 MH Sub I, LLC dba Internet Brands