update: my autos teacher had a meeting today, so we were unable to use the tools :mad: so we went out and bought all the necessary bolts and nuts today, cost me 13 bucks cuz theyre "fine threaded" or whatever... anyway, tomorrow we're good to go, ill update then... thanks for all your help guys
|
final update: we installed it today. it was a b!tch to get the bolts on the y-pipe -- catalytic converter out because of all the corosion. but it took us a while and the new y-pipe is on. its LOUD at idle and whenever i am driving. no "bees in a can" noise though. all i hafta do now is reset the ecu... does anybody by any chance know how to do that? i read my haynes manual, is "clearing the codes" resetting the ecu? or can i just disconnect the negative terminal of my battery?
thanks for all your help guys |
Originally Posted by enjoyincubus504
final update: we installed it today. it was a b!tch to get the bolts on the y-pipe -- catalytic converter out because of all the corosion. but it took us a while and the new y-pipe is on. its LOUD at idle and whenever i am driving. no "bees in a can" noise though. all i hafta do now is reset the ecu... does anybody by any chance know how to do that? i read my haynes manual, is "clearing the codes" resetting the ecu? or can i just disconnect the negative terminal of my battery?
thanks for all your help guys |
i tried looking it up... couldnt find it
|
can i just disconnect the positive terminal?
|
Originally Posted by enjoyincubus504
i tried looking it up... couldnt find it
http://forums.maxima.org/showthread.php?t=104931 RESETTING THE CHECK ENGINE LIGHT To reset the engine light is a simple procedure. 1. Turn the selector screw clockwise to its stop. 2. Wait 2 seconds. 3. Return back by turning the screw counterclockwise to its stop. 4. IMMEDIATELY REPEAT steps 1 to 3. The next time you start your engine, the check engine light should go away! |
Originally Posted by enjoyincubus504
it was a b!tch to get the bolts on the y-pipe -- catalytic converter out because of all the corosion.
sound clips? :wall: |
Originally Posted by ERTY67
There's one sticky all about checking/resetting the ECU. What couldn't you find?
http://forums.maxima.org/showthread.php?t=104931 RESETTING THE CHECK ENGINE LIGHT To reset the engine light is a simple procedure. 1. Turn the selector screw clockwise to its stop. 2. Wait 2 seconds. 3. Return back by turning the screw counterclockwise to its stop. 4. IMMEDIATELY REPEAT steps 1 to 3. The next time you start your engine, the check engine light should go away! |
Originally Posted by MaximaConvert
:werd:
sound clips? :wall: |
Originally Posted by enjoyincubus504
i was confused as to whether "clearing the codes" after that check engine light thing was the same as just resetting it, thanks
|
I'm wondering which one I should get. What is the difference between the budget one and the super flow?
|
Originally Posted by ERTY67
:laugh: gotcha! Yea man, it's the same. You enjoying that Y-pipe yet? It's one of my favorite mods :)
|
Originally Posted by Tristinn6
I'm wondering which one I should get. What is the difference between the budget one and the super flow?
|
for visual aid.......... http://community.webshots.com/photo/...91570500tIGNWb
|
Originally Posted by enjoyincubus504
erty67, we should meet up sometime over the summer and go to a meet or something
|
super flo flex section
does the super flo have a bees in the can sound? and does it flo better? anyone know? :mardi: :woot2:
|
Originally Posted by 86maxima96
does the super flo have a bees in the can sound? and does it flo better? anyone know? :mardi: :woot2:
|
Originally Posted by 86maxima96
does the super flo have a bees in the can sound? and does it flo better? anyone know? :mardi: :woot2:
|
All times are GMT -7. The time now is 11:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands