Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   4th Generation Maxima (1995-1999) (https://maxima.org/forums/4th-generation-maxima-1995-1999-6/)
-   -   Help knocking noise when accelerating (https://maxima.org/forums/4th-generation-maxima-1995-1999/326470-help-knocking-noise-when-accelerating.html)

xmastanax 10-21-2005 09:01 AM

Help knocking noise when accelerating
 
Hi there guys, just started noticing since couple of days. when i hit the gas real slow i can hear a knocking :smash: noise, but when i put the car in neutral and hit the gas no noise. if i drive less then 10 mph i can hear it constant, does not disappear.

if anyone got any strangest idea what this could be before the Pep boys #%#$ me tomorrow let me know

thanks in advance

xmastanax 10-21-2005 09:47 AM

any advice, any thoughts

thank u

tomservo291 10-21-2005 09:50 AM

like engine lifter noise? you need to be a bit more descriptive with "knocking."

Is consistent with engine RPMs, or is it something constant.. possibly to do with your suspension or drivetrain?

xmastanax 10-21-2005 09:59 AM

it is consistent with engine rpm's i hear it when less than 10mph. the noise only comes up in slow speed. but if i keep my car going at 10mph i'll hear it, "khat, khat, khat, khat" i wish i could describe the exact sound.

maxgtr2000 10-21-2005 12:50 PM

In other words you hear the knock only when the wheels are rotating correct?

Wills98MaxSE 10-21-2005 01:03 PM

I too have a knocking sound while i drive, sounds metallic b/w 3K - 4K rpms. any ideas? :gotme:

NmexMAX 10-21-2005 01:17 PM

Knock/ping/detonation
Screwed fuel.

jp_cout 10-21-2005 03:43 PM

is this sound coming from the engine or from the wheels??? I have approx. the same knocking but it's coming from my rear brake pads (I didn't replaced the little springs that holds them) so it sounds like this at low speed..

Dan 10-21-2005 03:55 PM

Try premium gas if you're not already using it, an octane booster, seafoam and/or chevron Techron additive.

xmastanax 10-21-2005 03:58 PM

thanks guys found the problem, i think so. took it to Midas once the car was lifted, both of my axle's were torn or broken right where they connect to the tire. the rubber covering was broken. i am going to get it replaced tomorrow for $313 at Pepboys. or $1000 at Nissan dealership

NmexMAX 10-21-2005 04:00 PM

Or 180$ (AZ 75$ per side) 30$ labor, or DIY for 150$ :slap:

xmastanax 10-21-2005 04:08 PM

To bad i don't know any good Nissan Mechanic's in the Los angeles side.

NmexMAX 10-21-2005 04:13 PM

You don't need to be a "Nissan" mechanic ... I take mine to my local alignment shop when I'm feeling lazy and my finacial situation is permitting. .. try it on your own too, it's not that bad ...


All times are GMT -7. The time now is 04:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands