KYB AGX's
 

Hey i just got my AGX's and S-techs put on yesterday! a few minutes ago i adjusted my front struts to 4 and i wanted to know if i could do the same on the back. and if i could....how can i get to them?

if you cant fit under the car behind the back wheel your best bet is to jack the car up in the rear. You may be able to do it w/out taking the wheel off but you may have to

no need to lift if they are on right just lay on the ground and adjust by reaching under......rears go from 1-8 by the way......

the adjuster should be facing the middle of the car for ease of adjustment

im about to go lay under my car
its kinda wet tho :(

You wimp, its just water . . . or is it :confused:


Just two more days and I get to enjoy the same setup.

ok so i set the backs to 8 and the fronts to 4

it felt a little bouncy tho, is this cause they are new? is there like a wear in period? is there anything i should know about this?

oh yeah max96se what are you set to?

i got KYB AGX and sprint springs. man is my ride stiff. even on the softest settings but i guess i gotta live with it.

or save up enough for illuminas, coil overs, or new springs.

my friend has iluminas and he hates um

what the h3ll were u expecting? :confused:

Sprints are HARSH and AGX's are very stiff on their own...

I personally like that, but you should have known what you were getting into when you bought this setup....Thats what the stickies are for....or maxmods....

bump to my previous comment 96max!