Red/cleared my tailights, figured i'd stick some LED's in there
 

So I got bored of my gen 1 altezza's (which I liked btw to all you altezza haters) and i decided to do something with my stock tails. Red/clears definately had to be done cuz orange is :007: and LED's was the only other mod i could think of. No PWM's on this setup; just voltage regulators and diodes to protect against reverse voltage or whatever. Yes wiring this sh1t was a MAJOR PITA and you should see all those loose wires in my trunk but that cleans up nicely with a bit of patience and a glue gun. Only kept the trunk lid lights as running lights cuz i think it looks better. SO here they are 108 superflux LED's later:

Before picture:
http://i43.photobucket.com/albums/e3...0r/maxback.jpg

Running lights only (bright white light is my door light,ignore that):
http://i43.photobucket.com/albums/e3...edtails004.jpg

And yes, red means BRAKE:

http://i43.photobucket.com/albums/e3...edtails006.jpg

http://i43.photobucket.com/albums/e3...edtails005.jpg

I might do anotehr set when i have time if i can think up some cool design worth doing. Tell me what y'all think.

Hey tikiboom

great job on the tail lights...... next time i'm in sauga... i'll keep an eye out for you......i'll b in the pearl white 3rd gen with BMW headlights and stillen


l8r

Torres

That is nice, get some daytime pics, and how long did it take you?

Nicely done.

LOL i hadnt noticed until hadman^^ pointed out that you can make out an "M" in the LED arrangement. Complete fluke but i like it.
Daytime pics:

http://i43.photobucket.com/albums/e3...edtails008.jpg

http://i43.photobucket.com/albums/e3...edtails007.jpg

Looks very nice.

Lookin good, excellent DIY job

Looks iite

how did u do that?????

that looks nice. LEDs nearly always look better.

Good job... probably my favorite kind of tail lights.

i like the tails in 'parking light mode' really sets off an aggressive tone. Wouldnt be able to guess wut kind of car it was at night. nice job!

hah i looked at your car and was like charcoal paint thats tite with those altezzas to which i typically am not partial, but i then i saw the finger marks but those gen 1 altezzas werent so bad

teh LEDs look great btw

http://memimage.cardomain.net/member...33_40_full.jpg

welcome to the club i dont know y the left inner looks crooked and brighter... camera was gay

looks real clean f550, did you use superflux LED's?
Im kinda worried mine are TOO bright since i got flashed a couple of times but fukc it ppl are gonna have to deal.

awesome job... we're seeing more of these lately...

nope no superflux i used these

http://search.ebay.com/search/search...rclo=&saprchi=

The parking lights looks dimmer then your braking lights. Are they or just how the camera light specturms is? I really like those cause it is kind of agressive looks and similar to the G35 coupe. Good job on those.

Looks pretty cool Bogdan! I think I saw your Max in the Mandarin restaurant parking lot in Mississauga the afternoon before we had the meet...

W/ the brakes on, all 4 tails are the same brightness (they get the same voltage). I took those pics at an angle so i guess thats why the right hand side ones look brighter. Headlights on and no brakes, trunklid tails are on but dimmed. I'm starting to like these more and more and one of these nights i have to drive behind my car to see what it looks like on the road.

Stefan, LOL yea that was me. My sister works at the Rogers store right next door.

Can Anyone please please please tell me how to do this mod?

first make an array of leds.. use superfulx ones if you can... then setup a pulse width modulator (or a voltage regulator) to dim the leds when u turn on the headlights

click this link to get the correct resistor basted on the leds you are using
http://led.linear1.org/led.wiz

loooks good man

Did you use a PWM? I believe you can you this to adjust the amount of voltage or amps going to the LEDs in the end it makes them brighter or dimmer. There is no need to have them running at 100% duty cycle. I mean imagine if you had red light directed right at your face, intensely. Otherwise just use some higher resistors

Looks good, I think I need to buy a set of stock tails...

Why aren't the LEDs arranged uniformly?

No, no PWM. While cool, i think it was overkill for this sort of project
the leds are rated at 70ma and I calculated resistor values for 60ma so they are not running at 100% duty cycle

It's amazing how bright those Superflux LED's are compared to all these other LED's people buy, Even the ones that are like 10000mcd and all that.