AGX's and stock springs: what settings?
 

I'm going to use AGX's with my stock springs. Anyone else run this setup, and if so, what setting on your AGX do you use.

Front:
If you want a soft ride use 1 (AGX don't ride soft on any setting)
If you want a hard ride use 4

Rear:
If you want a soft ride use 1
If you want a hard ride use 8

It's really up to YOU and YOUR driving preferance. Takes less then a minute to change the settings, so play around until you find a setting you like best.

I have AGX's with stock springs in my '97 GLE. The setting #1 on the front and #2 on the rear are equivalent to stock. #2 front and #4 rear are 15% stiffer, equal to GR2's. The higher settings are for shorter/stiffer spings. Up to 225% of stock. The stock settings was ok if that's what you like. I run settings of 2 & 4.

Thanks, everyone. I'll try 2 & 4, for starters.

The fronts have the 4-position screw on top, and the rears have the 8-position dial.

Is that normal?

Yes it is.

I run 2F/5R

What kins of improvements can I expect with these settings...particularly in reducing body lean?