Exhaust hanger question
 

Does anyone know the diam. of the holes? I know there are no 8mm, but are they 10mm or 12mm?
I DO NOT WANT TO GHETTO RIG AND USE HOSE CLAMPS TO FIX THE HANGERS! I plan to buy urethane ones. The Nismo ones are nice as well but are rubber.

i wanna say 10mm...i would got for the smaller ones..u can always enlarge them

Anyone else? Has anyone even changed theirs :squint:

never changed mine but they are 10mm. Your refering to the bolt that hold up the rubber hanger?

I have ES (universal) poly bushings INSIDE of each orignal hanger and a hose clamp around each of those from the b-pipe back.

Nismo super 1337 hangers > j00.


I went with the Nismo ones cause I got them for a deal. They do the job without excessive vibration, as where I would think twice on urethane. Fr33way has some pretty good ideas though, so.

The idea with the poly inside the stock rubber hangers is that is holds it VERY firm but does not transmit anymore vibration to the cabin.

The thing about the mounts is that they are around 10-11mm on the outside but once the hanger is slipped on the diamter is more like 7-8mm.

Urethane is not as harsh as you guys think :)

so waht did you end up doing? i need to do something about my shiznit.

Ima go measure tomorrow :)
I have a feeling they are 12mm. I read about some G20 people using 12mm. But I will make sure tomorrow, if it is 10mm, ima get off ebay. If they are 12mm, ima buy the Kartboy ones for subbi's

I am goin with the 12mm, 10mm is too close; since the urethane is fairly stiff it would be a ***** to squeeze them on there. I will post a review once I get them on the car.