![]() |
Help I'm Screwed!!
My sunroof is partially open now (about 4 inches or so) and i can't close it. When i push forward it does NOTHING, i can't even hear the motor but it goes back just fine. GGGGGGGRRRRRRRRRRRRR!!!!!
Any advice would be appreciated. |
this happened to me this week also. left my car parked with the sunroof vented and when it came time to close it for the night it would close i believe due to the rain that got in and wet up the switches. took the switches out and shook em out. let it dry for a few and worked as it should
|
check fuse/relay if that wont work push up and away from you and it will shut
|
Originally Posted by slinky87
check fuse/relay if that wont work push up and away from you and it will shut
<sigh> can it be a fuse? it still goes backwards???Where are the relays? |
Originally Posted by slinky87
check fuse/relay if that wont work push up and away from you and it will shut
up and away didnt work. Not even close. |
pull the panel the holds the switches and your lights off and cross the wire from the 'open' side of the switch to the 'close' side just to get it closed, then pull the switch and check it out/ or check it first before you jump the wire. if its gonna rain i'd jump it right away and deal with it later, at least it'll be closed.
|
Originally Posted by TunerMaxima3000
pull the panel the holds the switches and your lights off and cross the wire from the 'open' side of the switch to the 'close' side just to get it closed, then pull the switch and check it out/ or check it first before you jump the wire. if its gonna rain i'd jump it right away and deal with it later, at least it'll be closed.
How the hell do i cross those wires and y do u think it's the switch? http://www.t-mobilepictures.com/phot...om92ehp59hurdu This picture is better. i highlighted the wires. http://i46.photobucket.com/albums/f1...f826673a78.jpg |
http://www.t-mobilepictures.com/phot...om92ehp59hurdu
green is closed, yellow is open, you can remove the solder (heat it with a propane torch on the green side, remove the wire, heat the yellow side, remove the wire, and put the green on the yellow side it may work, just an idea, it should work if the problem is the switch I believe. im not 100% sure on this but you can always re solder it if it doesnt work just tryin to give an idea but check ALL your fuses first. |
Originally Posted by TunerMaxima3000
http://www.t-mobilepictures.com/phot...om92ehp59hurdu
green is closed, yellow is open, you can remove the solder (heat it with a propane torch on the green side, remove the wire, heat the yellow side, remove the wire, and put the green on the yellow side it may work, just an idea, it should work if the problem is the switch I believe. im not 100% sure on this but you can always re solder it if it doesnt work just tryin to give an idea but check ALL your fuses first. Thanks 4 the replies. There is definately something wrong with the track. i guess i'll just leave it closed for now.:reading: |
| All times are GMT -7. The time now is 04:24 AM. |
© 2026 MH Sub I, LLC dba Internet Brands