Who has used o2sim's heater?
 

I was wondering if anyone has substituted the rear o2 for the simulator and the heater circuit from
http://webstore.o2simulator.com/inde...PROD&ProdID=11
and
http://webstore.o2simulator.com/inde...WPROD&ProdID=5

And do you think the rear heater circuit resistor work for our cars?

Thanks

Very interesting web site. I'm struggling with an 0707 DTC. What code are you getting? My CEL will reset and eventually come back with a 0707 days later. It has done it three times now. Your post is a new option...but I only have three wires to my rear O2 sensor and one is purple (which does not mach your web site's diagrams). I think there is no heater on mine (1995 SE). Other factors with my 0707: The code did not come back until I put in 87 octane but did reset, also got not code with engine running and disconnected the sensor.

well you prob need to change out your rear o2 sensor or simulate it.

I have a 97 SE running a 96 SE ECU, which these two have two different rear o2 sensor. 95-96 have 3pin rear o2 while 97-99 have 4pin. What a pain in my @$$

Have you figured out how to get rid of the heater sensor CEL? I put in a TS ecu and changed one of the pins on the ecu in order to manipulate a heater circuit but it didn't work. I was even going as far to rewire the whole 4 wire sensor, but if you know of an easier way that would be great.