anyone know anyone with a 45 offset set of rims?
Well do yea punks....:o
To make this thread worthwhile to avoid teh lawk by the Kevlo... Im wondering if we can get some more stickies like the 5th gen forum... |
I had 17x7 +45 and they sit about the same as my 17x8 +40's.
Had 225/45/17 all around, and never had any rubbing issues what so ever. Although i think they could have used a 5-10mm spacer on the rears to bring them more flush. Actually perhaps even a 5mm spacer in the front would have made it look more flush. |
I am in this thread.
|
Originally Posted by 96blkonblkse
(Post 6077774)
I had 17x7 +45 and they sit about the same as my 17x8 +40's.
|
In terms of how they sit in relation to the fender. I would say both could use a small spacer to bring them out so they sit more flush. But my +40's seem to sit more flush. I attribute that to the slightly lower offset.
|
Originally Posted by 96blkonblkse
(Post 6077774)
I had 17x7 +45 and they sit about the same as my 17x8 +40's.
Had 225/45/17 all around, and never had any rubbing issues what so ever. Although i think they could have used a 5-10mm spacer on the rears to bring them more flush. Actually perhaps even a 5mm spacer in the front would have made it look more flush. |
Originally Posted by 96blkonblkse
(Post 6077774)
I had 17x7 +45 and they sit about the same as my 17x8 +40's.
Had 225/45/17 all around, and never had any rubbing issues what so ever. Although i think they could have used a 5-10mm spacer on the rears to bring them more flush. Actually perhaps even a 5mm spacer in the front would have made it look more flush. Im still thinking noobs would read the stickies more if they were all spread out like other forums... |
My rims did NOT stick out an additional 18mm..they would have been way outside the wheel well if they did lol. I was reffering to the distance to make it sit flush with the fender..
Given i never did really compare the 2, when i sold the 7's i basically swapped rims so i didnt have time to compare the 2. But i am going to stop here. I dont want to whore up the OP's thread. Continue mazivart. Edit- rather then posting again, you know it might have actually, cuz the 17x7's sat in the fender id say maybe a little more then the stockers cant really tell you for sure though. |
Originally Posted by 96blkonblkse
(Post 6079022)
My rims did NOT stick out an additional 18mm..they would have been way outside the wheel well if they did lol. I was reffering to the distance to make it sit flush with the fender..
Given i never did really compare the 2, when i sold the 7's i basically swapped rims so i didnt have time to compare the 2. But i am going to stop here. I dont want to whore up the OP's thread. Continue mazivart. Also keep in mind "flush" is subjective, it depends on the person looking at it. |
Originally Posted by 96blkonblkse
(Post 6079022)
My rims did NOT stick out an additional 18mm..they would have been way outside the wheel well if they did lol. I was reffering to the distance to make it sit flush with the fender..
Given i never did really compare the 2, when i sold the 7's i basically swapped rims so i didnt have time to compare the 2. But i am going to stop here. I dont want to whore up the OP's thread. Continue mazivart. Edit- rather then posting again, you know it might have actually, cuz the 17x7's sat in the fender id say maybe a little more then the stockers cant really tell you for sure though. |
Originally Posted by Fr33way™
(Post 6077861)
I am in this thread.
|
I've always wondered if its ok for the OP to post whore their own thread?
|
I know this crap waqs posted just last week. The worst part is some people are still answering as if they have never seen this thread ever, This thread sucks
|
Originally Posted by hectorc
(Post 6079739)
I know this crap waqs posted just last week. The worst part is some people are still answering as if they have never seen this thread ever, This thread sucks
|
Just look at any car with 17" Nissan rims from 02-06. They are all +45 offset
|
Originally Posted by hectorc
(Post 6079763)
Just look at any car with 17" Nissan rims from 02-06. They are all +45 offset
|
|
I get it.....I guess today I'm not in one of those moods. I see this as a waste because some people are actually looking for an answer in this thread.
|
Originally Posted by maximaserg
(Post 6079790)
|
Originally Posted by hectorc
(Post 6079795)
I get it.....I guess today I'm not in one of those moods. I see this as a waste because some people are actually looking for an answer in this thread.
|
Too answer the Question.
I have 16x7.5 +45 (Z32 wheels) They fit fine and clear the Z32 front brakes. I think they are kind of weak considering the room under a 4th gen. Other offsets when picked correctly allow the use of much larger wheels and tires (I'm talking wider, not stupid 20+ sizes) http://thumb0.webshots.net/s/thumb2/...1hpZjEA_th.jpg |
Originally Posted by z32drifter
(Post 6080376)
Too answer the Question.
I have 16x7.5 +45 (Z32 wheels) They fit fine and clear the Z32 front brakes. I think they are kind of weak considering the room under a 4th gen. Other offsets when picked correctly allow the use of much larger wheels and tires (I'm talking wider, not stupid 20+ sizes) http://thumb0.webshots.net/s/thumb2/...1hpZjEA_th.jpg |
Threatd title="anyone know anyone with a 45 offset set of rims?"
Originally Posted by mazzivart
(Post 6077740)
Well do yea punks....:o
To make this thread worthwhile to avoid teh lawk by the Kevlo... Im wondering if we can get some more stickies like the 5th gen forum... N/A Z32 wheels 16"x7.5"wide 45mm offset on 245/50/16 tires (a lil tall but me likey) |
Originally Posted by mazzivart
(Post 6077740)
Well do yea punks....:o
To make this thread worthwhile to avoid teh lawk by the Kevlo... Im wondering if we can get some more stickies like the 5th gen forum? |
Originally Posted by hectorc
(Post 6079763)
Just look at any car with 17" Nissan rims from 02-06. They are all +45 offset
|
Originally Posted by Vlasic
(Post 6082450)
Do you mean any maxima from 02-06 or any Nissan? 17" Z wheels are not +45.
I meant FWD cars....I posted it in another thread but bypassed it this time. :o |
Originally Posted by mazzivart
(Post 6081642)
anyone else see the other thread with the same title....its because it was retarded...thats why I copied it and made a new thread....GAWD DAMN people really dont read the firsts post of threads do they....
That was read, but it should be PM'd to the 4th gen moderators instead of posting another thread. It was a dumb title to begin with, and misleading to many that don't have a clue or know how to read. |
Originally Posted by hectorc
(Post 6082913)
That was read, but it should be PM'd to the 4th gen moderators instead of posting another thread. It was a dumb title to begin with, and misleading to many that don't have a clue or know how to read.
|
All times are GMT -7. The time now is 04:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands