Retrofit Projectors
I'm looking at picking up some 6k bulbs and ballasts from the classifieds, getting some ebay 1 piece headlights and retrofitting them.
Would these projectors work? http://cgi.ebay.com/ebaymotors/ACURA...spagenameZWDVW What else would I need? do you guys reccomend certain projectors? thanks |
TSX projectors are great. I would register to hidplanet.com/forums and ask any headlight/projector questions there.
|
TSX or S2K projectors FTW!
|
Those TSX projectors are good but not the best. They're also single xenon, which means you'll lose your highbeams if you use your stock headlights. However, if you're getting those ebay headlights, I'm sure it'll have its own separate highbeams so TSX is good. For bixenons, I recommend these: TL, FX, Porches bixenons, RS6, E46 bixenons, valeo bixenons. TSX projectors are relatively small so the retrofit should be easy. 4 most important things you'll need to start a retro is 2 ballasts, 2 bulbs, 2 projectors, and 2 headlights. The rest....shrouds, bezels, etc....is up to you because they're more for looks. Other than that, you'll need the right tools such as a dremel tool, jb weld, rtv silicon sealant, nuts and bolts, and lastly, some patience. Refer to this DIY. Good luck.
http://www.vqpower.com/v2/infusions/...?article_id=75 |
Like Imports only said, you will lose the high beam function.
But in my case, i just aimed my TSX projectors a tad bit higher and i have no urge to click my stalk for a high beam. The only thing with aiming it higher, is that it bothers oncoming traffic. i plan on doing the retro again with the R34 and utilize the inner portion for a high beam. |
without high beams u will fail inspection, so u might want to look for Bixenons unless u plan on doing dual projectors one high and the TSX will be ur lows
TL, or FX will be ur best bet they are cheap and have good output. |
TL projectors FTW. :)
S |
Just don't try to put the TL's into the R34 housings, the projectors are too big to do so without a lot of extra work.
|
Originally Posted by Crusher103
(Post 6493031)
without high beams u will fail inspection, so u might want to look for Bixenons unless u plan on doing dual projectors one high and the TSX will be ur lows
TL, or FX will be ur best bet they are cheap and have good output. |
<-- S2K's in R34's user. High beams intact. :D
|
Originally Posted by kzoosho
(Post 6493112)
TL's arent cheap but they are the best bixenon out there. The fx is a so so projector and the high beam sucks. The Murano is a great projector but is a tad wide.
|
Originally Posted by Crusher103
(Post 6493409)
i found a set for $170, the E55 i have cost $150 before shipping they are not that expensive, look for Q45 gattling style projectors U wanna talk expensive :laugh:
S |
I put fx projectors in my r34 housings. They're a little bit larger than the tsx. I love the lights now. I just dremeled the projectors down to size and mounted them. There's two ways you can mount them.
1) The way w/ 4 bolts coming off the back of the projector where it hangs on the back of the housing. 2) Or you can make some mounting brackets. The link below has pics of this method. Here's a good link on mounting. http://www.hidplanet.com/forums/viewtopic.php?t=35064 * you might have to make a username to see it... idk * |
Originally Posted by dentman
(Post 6495245)
dfivwleuitvwel
It's not that hard to make 15 useful posts....... |
Originally Posted by dentman
(Post 6495245)
If you want good high beams, just get some TL bixenons, and make sure they're the DOT style with a vertical flare instead of the "slant" style with the slanted flare. They are much sharper, wider and brighter. TLs have the best high beam out of pretty much any bixenon projector.
|
Originally Posted by MorpheusZero
(Post 6495287)
Man this guy was helpful! Thanks so much newbie!
He picked the wrong thread for sure to post his gargbage in.... Check out his 12 awesome posts thus far... LOL |
Originally Posted by Shoto925
(Post 6492817)
I'm looking at picking up some 6k bulbs and ballasts from the classifieds, getting some ebay 1 piece headlights and retrofitting them.
Would these projectors work? http://cgi.ebay.com/ebaymotors/ACURA...spagenameZWDVW What else would I need? do you guys reccomend certain projectors? thanks |
Originally Posted by Crusher103
(Post 6493409)
i found a set for $170, the E55 i have cost $150 before shipping they are not that expensive, look for Q45 gattling style projectors U wanna talk expensive :laugh:
|
Originally Posted by maxprivate
(Post 6495450)
You found Tl projectors for only $170 ? Well you still need the ballast, ignitor and bulbs so it gets expensive.
|
Originally Posted by Crusher103
(Post 6497985)
well no sh*t, go spend another 150 in the GD section for a 50W kit, buy a wiring harness for $50 or make one if u have the patiences and ur done, thats how i got my retro together, in total any retro is going to be over $300, i was just saying for what TL projectors are(some of the best on the market) they really arent all that expensive
|
I really want the ZKW lenses, but just don't have the funds. I've also thought about doing the color mod...but probably won't. I would just be happy to have projectors.
S |
Originally Posted by maximase86
(Post 6498567)
I really want the ZKW lenses, but just don't have the funds. I've also thought about doing the color mod...but probably won't. I would just be happy to have projectors.
S |
All times are GMT -7. The time now is 02:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands