sHaDyOneDeath's Tokico Illumina Kit Installation thread
 

Will get lots of pictures tomorrow but a few questions first.


I need to know how far my struts will compress in order to measure/cut my shock boots. They're Rancho shock boots for about 3$ on amazon, great quality, rubber feels strong.

Some pictures of lengths.
Wonder how much play i have here..
http://img.photobucket.com/albums/v8...h/DSC03002.jpg

Loose on the struts:
http://img.photobucket.com/albums/v8...h/DSC02998.jpg

Secured to the bottom of the strut basehttp://img.photobucket.com/albums/v8...h/DSC02999.jpg

Being there is no way to attach them to the top mount, don't cut anything. They will stand up on their own and compress plenty as the strut compresses. You will need to install a bump stop onto the strut piston. You can reuse the OEM stop if you still have the old dust boots, otherwise get new bumpers from your local auto parts store.

oh, there is a way to mount. Im using my OEM bump stops and zip tying them to it. I was just wondering how far down the piston goes because i know for sure these boots are too long.

Thanks

Question : is it me or does this guy have his springs upside down?
http://www.vqpower.com/images/tokico/PICT0605.jpg

I thought the most "coiled" part goes on bottom?

im installed rears at the moment.

Those springs are installed correct.

Random pics. I was under a time constraint (work) so i didnt have time to stop and take pictures.

http://img.photobucket.com/albums/v8...h/DSC03003.jpg

Old stock springs and KYB Gr-2's
http://img.photobucket.com/albums/v8...h/DSC03006.jpg

Front spring comparison
http://img.photobucket.com/albums/v8...h/DSC03008.jpg

Rancho Dust boots (3$ each @ amazon)

http://img.photobucket.com/albums/v8...h/DSC03010.jpg

Your springs are installed upside down. Closer wound coils go up.
Paint your mud flaps body color.

Where are you placing the jackstands btw? You're supposed to place them on the frame rails in the front IIRC, as per the FSM.

Bens stand points. (who the fck is ben? :confused: haha)
http://img.photobucket.com/albums/v8...7_102_full.gif

Yea i know, that picture was taken in the day. At night, when i got back from work, i took on the rears and noticed they were upside down. I took the fronts off again once the rears where done and all is good now.

Looks pretty similar to an H&R drop.

Yea, that guy.
ben. :D
http://forums.maxima.org/member.php?u=584

Good thing he didnt do the write up :wall:

I'd compare Ben to pmohr, both very knowledgeable users on this forum at different times

They are nothing alike, sorry....