Is my auto f'ed again?
 

Sup org,
Ok so I went to the 1/4 mile an ran my car 2 times once with the (I thought) DR unplugged I guess it wasn't the DR but it shifted different and the SES light came on but no o/d light the code was for solenoid a high resistance or something of the sort

So now it slips in first and has no tcc at all also when cold it slams the 1-2 shift

I searched and searched for 2 day and found it may be a solenoid pack assemble and there is a tsb

My question to you is... Does this sound feasible or do I have to replace my trans

Any help is greatly appreciated
THANKS ORG :D

prolly the shift solenoids my man.

If tha car was locked in a single gear then i wd say the tranny is f'ed. but since the car still shifting then its prolly just the shift solenoids.

However, replace the entire tranny with used tranny will be cheaper than buying a new shift solenoid assembly.

I read that with the tsb part number it only comes to 150 bones for the solenoids

if thats the case man, then why u still sitting there???

replace that bish!! :p

What did you unplug?

I thought it was the drop resistor but I think it was the 1st line pressure solenoid

Would a bad solenoid cause a slip on 1 st? It goes away if I baby the car and doesn't exactly know when to shift

Did you unplug this?

http://www.vqpower.com/images/howto/drmod/DR1.JPG

Yup

It's odd that you're having that problem then because that is the drop resistor. And for you to only run twice with it unplugged shouldn't have damaged your tranny.

I only ran once with it unplugged but rode the hour all the way home with the code

get a 5 speed lol. i basically drove my car home from the dealer, dismantled it and put in a 5speed :-) but that was many years ago and my car is on its last leg now

Trust me I'm seriously considering it but I don't have the time or the money and I NEED my car

If I don't hammer on it the trans won't slip it runs the same as always aside from not having a TCC Ima just replace the solenoids

Thanks to everybody for your help